show amt summary
Syntax
Release Information
Command introduced in JUNOS Release 10.2.
Description
Display summary information about the Automatic Multicast Tunneling (AMT) protocol.
Options
- none
Display summary information about all AMT protocol instances.
- instance instance-name
(Optional) Display information for the specified instance only.
- logical-system (all | logical-system-name)
(Optional) Perform this operation on all logical systems or on a particular logical system.
Required Privilege Level
view
Related Topics
List of Sample Output
show amt summaryOutput Fields
Table 1 describes the output fields for the show amt summary command. Output fields are listed in the approximate order in which they appear.
Table 1: show amt summary Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
AMT anycast prefix | Prefix advertised by unicast routing protocols to route AMT discovery messages to the router from nearby AMT gateways. | All levels |
AMT anycast address | Anycast address configured from which the anycast prefix is derived. | All levels |
AMT local address | Local unique AMT relay IP address configured. Used to send AMT relay advertisement messages, it is the IP source address of AMT control messages and the source address of the data tunnel encapsulation. | All levels |
AMT tunnel limit | Maximum number of AMT tunnels that can be created. | All levels |
active tunnels | Number of active AMT tunnel interfaces. | All levels |
Sample Output
show amt summary
user@host> show amt summary AMT anycast prefix : 20.0.0.4/32 AMT anycast address : 20.0.0.4 AMT local address : 20.0.0.4 AMT tunnel limit : 1000, active tunnels : 2
