Example: Configuring a Point-to-Multipoint LSP
Configure a point-to-multipoint LSP based on the topology shown in Point-to-Multipoint LSPs. There are four branch LSPs, each belonging to a single point-to-multipoint LSP called p2mp-lsp-sample.
[edit protocols mpls]label-switched-path branch-LSP-to-PE2 {to 10.255.235.25;p2mp p2mp-lsp-sample;primary path1;}label-switched-path branch-LSP-to-PE2 {to 10.255.235.25;p2mp p2mp-lsp-sample;primary path2;}label-switched-path branch-LSP-to-PE3 {to 10.255.241.34;p2mp p2mp-lsp-sample;primary path3;}label-switched-path branch-LSP-to-CE4 {to 10.255.244.125;p2mp p2mp-lsp-sample;primary path4;}
