Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
SNMP System Log Messages
This chapter describes messages with the SNMP prefix. They are generated by two kinds of processes:
- Processes that perform SNMP operations, such as the MIB II process (mib2d) and the SNMP agent process (snmpd). Those processes also generate messages with prefixes that match their names, as described in “MIB2D System Log Messages” on page 373 and “SNMPD System Log Messages” on page 513.
- Processes that are instrumented to generate system log messages when they send SNMP traps. The SNMP remote operations process (rmopd) is one such process. It also generates messages with the RMOPD_ prefix, which are described in “RMOPD System Log Messages” on page 419.
SNMP_GET_ERROR1
System Log Message
function-name operation failed for object-name: index1 index1 (error-message)
Description
An SNMP Get or GetNext request failed for the indicated object, which has the indicated index.
Type
Error: An error occurred
Severity
error
Facility
LOG_DAEMON
Cause
An internal software failure occurred.
Action
Contact your technical support representative.
SNMP_GET_ERROR2
System Log Message
function-name operation failed for object-name: index1 index1 index2 index2 (error-message)
Description
An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.
Type
Error: An error occurred
Severity
error
Facility
LOG_DAEMON
Cause
An internal software failure occurred.
Action
Contact your technical support representative.
SNMP_GET_ERROR3
System Log Message
function-name operation failed for object-name: index1 index1 index2 index2 index3 index3 (error-message)
Description
An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.
Type
Error: An error occurred
Severity
error
Facility
LOG_DAEMON
Cause
An internal software failure occurred.
Action
Contact your technical support representative.
SNMP_GET_ERROR4
System Log Message
function-name operation failed for object-name: index1 index1 index2 index2 index3 index3 index4 index4 (error-message)
Description
An SNMP Get or GetNext request failed for the indicated object, which has the indicated indexes.
Type
Error: An error occurred
Severity
error
Facility
LOG_DAEMON
Cause
An internal software failure occurred.
Action
Contact your technical support representative.
SNMP_RTSLIB_FAILURE
System Log Message
function-name: reason: error-message
Description
A call to the indicated function in the routing socket library failed with the indicated error.
Type
Error: An error occurred
Severity
emergency
Facility
LOG_DAEMON
Cause
An internal software failure occurred.
Action
Contact your technical support representative.
SNMP_TRAP_LINK_DOWN
System Log Message
ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status, ifName interface-name
Description
The SNMP agent process (snmpd) generated a linkDown trap because the indicated interface changed state to 'down'.
Type
Event: This message reports an event, not an error
Severity
warning
Facility
LOG_DAEMON
SNMP_TRAP_LINK_UP
System Log Message
ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status, ifName interface-name
Description
The SNMP agent process (snmpd) generated a linkUp trap because the indicated interface changed state to 'up'.
Type
Event: This message reports an event, not an error
Severity
info
Facility
LOG_DAEMON
SNMP_TRAP_TRACERT_PATH_CHANGE
System Log Message
traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name
Description
The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a traceRoutePathChange trap because two probes with the same time-to-live (TTL) value returned with different IP addresses.
Type
Event: This message reports an event, not an error
Severity
info
Facility
LOG_DAEMON
SNMP_TRAP_TRACERT_TEST_COMPLETED
System Log Message
traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name
Description
The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a tracerouteTestCompleted trap because the test completed and the full path to the target was determined.
Type
Event: This message reports an event, not an error
Severity
info
Facility
LOG_DAEMON
SNMP_TRAP_TRACERT_TEST_FAILED
System Log Message
traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name
Description
The Simple Network Management Protocol (SNMP) remote operations process (rmopd) generated a tracerouteTestFailed trap because the test completed and the full path to the target was not determined.
Type
Event: This message reports an event, not an error
Severity
info
Facility
LOG_DAEMON
