RMOPD System Log Messages

This chapter describes messages with the RMOPD prefix. They are generated by the Simple Network Management Protocol (SNMP) remote operations process (rmopd), which services SNMP requests for execution of ping and traceroute operations.

RMOPD_ADDRESS_MULTICAST_INVALID

System Log Message

Multicast address is not allowed

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify the addresses of the source and target hosts for the operation. A request failed because the client specified a multicast address for either or both the source and target hosts.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_ADDRESS_SOURCE_INVALID

System Log Message

Source address invalid: error-message

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify the address to use as the source host for the operation, along with the corresponding address type (such as IP version 4 [IPv4]). Either the specified address was invalid because it did not match the specified address type, or the address could not be resolved.

Type

Error: An error occurred

Severity

notice

Facility

LOG_DAEMON

RMOPD_ADDRESS_STRING_FAILURE

System Log Message

Unable to convert numeric address to string: error-message

Description

The remote Simple Network Management Protocol (SNMP) operations process (rmopd) could not convert a numeric host address to the corresponding hostname text string.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_ADDRESS_TARGET_INVALID

System Log Message

rmop_util_set_address status message: error-message

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it must specify the address of the target host along with the corresponding address type (such as IP version 4 [IPv4]). Either the specified address was invalid because it did not match the specified address type, or the address could not be resolved.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_ICMP_ADDR_TYPE_UNSUPPORTED

System Log Message

Only IPv4 source address is supported

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify the address type (such as IP version 4 [IPv4]) of the source and target hosts for the operation. The client specified an unsupported address type.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_IFINDEX_NOT_ACTIVE

System Log Message

ifindex: snmp-interface-index

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify which interface to use as the source host address, identifying it by either its numerical index or its name. The indicated index was invalid because it represents an inactive interface.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_IFINDEX_NO_INFO

System Log Message

No information for snmp-interface-index, message: error-message

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify which interface to use as the source host address, identifying it by either its numerical index or its name. The SNMP remote operations process (rmopd) could not find any information about the interface with the indicated index.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_IFNAME_NOT_ACTIVE

System Log Message

ifname: interface-name

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify which interface to use as the source host address, identifying it by either its numerical index or its name. The indicated name was invalid because it represents an inactive interface.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_IFNAME_NO_INFO

System Log Message

No information for interface-name, message: error-message

Description

When a Simple Network Management Protocol (SNMP) client requests a remote operation, it can specify which interface to use as the source host address, identifying it by either its numerical index or its name. The SNMP remote operations process (rmopd) could not find any information about the interface with the indicated name.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_ROUTING_INSTANCE_NO_INFO

System Log Message

No information for routing instance routing-instance: error-message

Description

The indicated routing instance does not exist, so the Simple Network Management Protocol (SNMP) remote operations process (rmopd) could not retrieve information about it.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

RMOPD_TRACEROUTE_ERROR

System Log Message

Message: error-message

Description

The traceroute application reported the indicated error message to the Simple Network Management Protocol (SNMP) remote operations process (rmopd).

Type

Error: An error occurred

Severity

notice

Facility

LOG_DAEMON