JPTSPD System Log Messages

This chapter describes messages with the JPTSPD prefix. They are generated by the packet-triggered subscriber process (jptspd) which creates and manages packet-triggered subscriber interfaces. A packet-triggered subscriber interface is created when the router receives a packet with an IP source address that does not match any entries in the demultiplexer table. When the router detects an unmatched packet, it generates a trigger event that determines whether to create a dynamic subscriber interface or configure an existing interface.

JPTSPD_INIT_FAILURE

System Log Message

JPTSPD failed to initialize

Description

The packet triggered subscriber process (jptspd) initialization failed.

Type

Error: An error occurred

Severity

error

Facility

ANY

Cause

One possible cause is that the system is out of memory.

Action

Contact your technical support representative.

JPTSPD_OUT_OF_MEMORY

System Log Message

Out of memory

Description

The packet triggered subscriber process (jptspd) could not dynamically allocate memory.

Type

Error: An error occurred

Severity

error

Facility

ANY

Cause

A software bug caused a memory leak, or too many subscriber and service sessions.

Action

Contact your technical support representative.

JPTSPD_PIC_CONNECTED

System Log Message

JPTSPD connected to pic pic-name

Description

The packet triggered subscriber process (jptspd) connected to a PIC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

JPTSPD_PIC_DISCONNECTED

System Log Message

JPTSPD disconnected to pic pic-name reason

Description

The packet triggered subscriber process (jptspd) disconnected to a PIC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

JPTSPD_SRC_FAST_SYNC_ABORT

System Log Message

JPTSPD fast synchronization was aborted partition-name

Description

The packet triggered subscriber process (jptspd) aborted fast synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

Cause

One possible cause is that the connection between jptspd and SRC is down.

JPTSPD_SRC_FAST_SYNC_DONE

System Log Message

JPTSPD fast synchronization was done partition-name

Description

The packet triggered subscriber process (jptspd) finished fast synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

JPTSPD_SRC_FAST_SYNC_START

System Log Message

JPTSPD fast synchronization started partition-name

Description

The packet triggered subscriber process (jptspd) started fast synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

JPTSPD_SRC_FULL_SYNC_ABORT

System Log Message

JPTSPD full synchronization was aborted partition-name

Description

The packet triggered subscriber process (jptspd) aborted full synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

Cause

One possible cause is that the connection between jptspd and SRC is down.

JPTSPD_SRC_FULL_SYNC_DONE

System Log Message

JPTSPD full synchronization was done partition-name

Description

The packet triggered subscriber process (jptspd) finished full synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY

JPTSPD_SRC_FULL_SYNC_START

System Log Message

JPTSPD full synchronization started partition-name

Description

The packet triggered subscriber process (jptspd) started full synchronization with SRC.

Type

Event: This message reports an event, not an error

Severity

info

Facility

ANY