JCS System Log Messages

This chapter describes messages with the JCS prefix. They are generated by the Juniper Control System (jcsd) process which provides the user interface to the control processes for the management modules and switch modules in the JCS 1200 platform.

JCS_BBD_LOAD_FAILURE

System Log Message

Blade slot load BBD falure: error-message

Description

The JCS process (jcsd) could not load blade bay data for the specified blade.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_LOCAL_MISMATCH

System Log Message

Blade slot BBD error-message mismatch (expected-value != received-value)

Description

The blade bay data retrieved for the specified blade does not match the data loaded during the reboot process. This error usually indicates that blade bay data in the JCS Management Module was changed since the last reboot.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_NOT_FOUND

System Log Message

Blade slot bay data not found

Description

Blade bay data was not found for the specified blade.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_NOT_VALID

System Log Message

Blade slot BBD is invalid

Description

The blade bay data for the specified blade is invalid.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_PARSE_ERROR

System Log Message

Blade slot bay data parse error - error-message

Description

The blade bay data for the specified blade did not parse correctly.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_PEER_MISMATCH

System Log Message

Peer blade slot BBD error-message mismatch (expected-value != received-value)

Description

The blade bay data retrieved for the specified peer blade does not match the data retrieved for the local blade. This error indicates that blade bay data in the JCS Management Module was not configured properly.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_BBD_SYSTEM_CONFLICT

System Log Message

Local BBD error-message (value) conflicts with blade slot

Description

The blade bay data retrieved for the local blade conflicts with another blade in the JCS. This error indicates that blade bay data in the JCS Management Module was not configured properly.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_EXT_LINK_STATE

System Log Message

Switch slot EXT link state is state

Description

The JCS process (jcsd) detects a change of state for the external link of the indicated switch module.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_INVALID_BANDWIDTH_ERROR

System Log Message

Invalid bandwidth percent (value)

Description

The specified switch bandwidth is invalid. The bandwidth is defined as a percentage between 1 and 100.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_KERNEL_RSD_LINK_DOWN

System Log Message

Kernel RSD link is DOWN (error-message)

Description

The JCS process (jcsd) has disabled kernel RSD communcation for the specified reason.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_KERNEL_RSD_LINK_ENABLED

System Log Message

Kernel RSD link is ENABLED (error-message)

Description

The JCS process (jcsd) has verified the blade bay data and enabled kernel RSD communication.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_MM_COMMUNICATION_ERROR

System Log Message

MM communication error (error-message)

Description

The JCS process (jcsd) could not send an SNMP request to the Management Module because of the indicated error.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_MM_COMMUNICATION_OK

System Log Message

MM communication is OK

Description

The JCS process (jcsd) has established a communication link with the Management Module.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_PEER_BLADE_STATE

System Log Message

Peer blade slot is state

Description

The JCS process (jcsd) detects a change of state for the indicated blade.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_READ_BANDWIDTH_ERROR

System Log Message

Read bandwidth error (error-code)

Description

The indicated error occured when attempting to read the current switch bandwidth.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_READ_BBD_ERROR

System Log Message

Read blade bay data (error=error-code)

Description

The indicated error occured when attempting to read the current blade bay data via a sysctl call.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_RSD_LINK_STATE

System Log Message

Switch slot RSD link state is state

Description

The JCS process (jcsd) detects a change of state for the RSD link of the indicated switch module.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_SWITCH_BANDWIDTH_CONFIG

System Log Message

Switch slot bandwidth value1 percent (value2 KBPS)

Description

The indicated JCS Switch Module has changed the bandwidth configuration to the specified value.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON

JCS_SWITCH_COMMUNICATION_ERROR

System Log Message

Switch slot communication error (error-message)

Description

The JCS process (jcsd) could not send an SNMP request to the indicated Switch Module because of the indicated error.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

JCS_SWITCH_COMMUNICATION_OK

System Log Message

Switch slot communication is OK

Description

The JCS process (jcsd) has established a communication link with the indicated Switch Module.

Type

Event: This message reports an event, not an error

Severity

info

Facility

LOG_DAEMON