DCD System Log Messages

This chapter describes messages with the DCD prefix. They are generated by the interface process (dcd), which controls the physical interface devices and logical interfaces in the routing platform.

DCD_GRE_CONFIG_INVALID

System Log Message

Either tunnel key or clear-dont-fragment-bit must be configured for this GRE tunnel (interface-name), to enable post fragmentation

Description

This interface needs either the tunnel key or the clear-dont-fragment-bit to be configured along with allow-fragmentation

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

Action

Configure either the tunnel key or clear-dont-fragment-bit for this tunnel

DCD_MALLOC_FAILED_INIT

System Log Message

Memory allocation failed during initialization for configuration load

Description

The interface process (dcd) could not dynamically allocate memory in preparation for loading a configuration.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

Cause

A software bug caused a memory leak, or the routing platform had insufficient memory.

Action

Contact your technical support representative.

DCD_PARSE_CFG_WARNING

System Log Message

configuration-statement : warning-message

Description

The interface-control process (dcd) found a discrepant configuration

Type

Error: An error occurred

Severity

warning

Facility

ANY

Cause

This is a warning message and the current configuration has a few discrepancies to be addressed.

Action

Contact your technical support representative.

DCD_PARSE_EMERGENCY

System Log Message

dcd_config: errors while parsing configuration file

Description

The interface process (dcd) encountered an unhandled internal state while parsing the configuration database.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

Cause

There might be a bug in the dcd process' parser.

Action

Contact your technical support representative.

DCD_PARSE_ERROR_CLOCK

System Log Message

PIC housing interface interface-name does not support clocking as configured

Description

The 'clocking' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the 10-Gigabit Ethernet IQ2 Physical Interface Card (PIC).

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'clocking' statement from the configuration for the interface.

DCD_PARSE_ERROR_HIER_SCHEDULER

System Log Message

interface-name: PIC or encapsulation type does not support 'hierarchical-scheduler' statement

Description

The 'hierarchical-scheduler' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported either by the PIC or the configured type of encapsulation.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'hierarchical-scheduler' statement from the configuration for the interface.

DCD_PARSE_ERROR_IFLSET

System Log Message

Interface interface-name does not support 'interface-set' statement

Description

The 'interface-set' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the interface.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'interface-set' statement from the configuration for the interface.

DCD_PARSE_ERROR_MAX_HIER_LEVELS

System Log Message

interface-name: PIC or encapsulation type does not support 'maximum-hierarchy-levels' statement

Description

The 'hierarchical-scheduler maximum-hierarchy-levels' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported either by the PIC or the configured type of encapsulation.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'hierarchical-scheduler maximum-hierarchy-levels' statement from the configuration for the interface.

DCD_PARSE_ERROR_SCHEDULER

System Log Message

interface-name: PIC or encapsulation type does not support 'per-unit-scheduler' or 'shared-scheduler' statement

Description

The 'per-unit-scheduler' or 'shared-scheduler' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported either by the PIC or the configured type of encapsulation.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'per-unit-scheduler' or 'shared-scheduler' statement from the configuration for the interface.

DCD_PARSE_ERROR_SCHEDULER_LIMIT

System Log Message

interface-name: exceeds the allowed limit (maximum-value) of 'per-unit-scheduler' interface statement for PIC=pic-slot on FPC=fpc-slot

Description

The 'per-unit-scheduler' statement is enabled on more interfaces than what this PIC would suppport.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'per-unit-scheduler' statement from the configuration for the interface.

DCD_PARSE_ERROR_VLAN_TAGGING

System Log Message

interface-name: PIC type does not support flexible-vlan-tagging statement

Description

The 'flexible-vlan-tagging' statement is included at the [edit interfaces] hierarchy level for the indicated interface, but is not supported by the Physical Interface Card (PIC) that houses the interface.

Type

Error: An error occurred

Severity

warning

Facility

LOG_DAEMON

Action

Remove the 'flexible-vlan-tagging' statement from the configuration for the interface.

DCD_PARSE_ERR_INCOMPATIBLE_CFG

System Log Message

configuration-statement : Incompatible configuration detected : warning-message

Description

The interface process (dcd) found a configuration which will not be supported in future releases.

Type

Error: An error occurred

Severity

warning

Facility

ANY

Cause

This is a warning and the configuration will not be supported in future release.

Action

Contact your technical support representative.

DCD_PARSE_MINI_EMERGENCY

System Log Message

dcd_mini_config: errors while parsing configuration overlay

Description

The interface process (dcd) encountered an unhandled internal state during interface parsing.

Type

Error: An error occurred

Severity

error

Facility

LOG_DAEMON

Cause

There might be a bug in the dcd process' parser.

Action

Contact your technical support representative.

DCD_PARSE_STATE_EMERGENCY

System Log Message

An unhandled state was encountered during interface parsing

Description

The interface process (dcd) encountered an unhandled internal state during interface parsing.

Type

Error: An error occurred

Severity

emergency

Facility

LOG_DAEMON

Cause

There might be a bug in the dcd process' parser.

Action

Contact your technical support representative.