Configuring Multicast VPNs

This chapter describes how to configure multiprotocol BGP-based (MBGP) multicast VPNs (MVPNs), and discusses the following topics:

• Introduction to Configuring MBGP MVPNs
• Configuring Routing Instances for an MBGP MVPN
• Configuring SPT-Only Mode for Multiprotocol BGP-Based Multicast VPNs
• Configuring Shared-Tree Data Distribution Across Provider Cores for Providers of MBGP MVPNs
• Configuring VRF Route Targets for Routing Instances for an MBGP MVPN
• Limiting Routes to Be Advertised by an MVPN VRF Instance
• Configuring NLRI Parameters for an MBGP MVPN
• Configuring PIM Provider Tunnels for an MBGP MVPN
• Configuring PIM-SSM GRE Selective Provider Tunnels
• Configuring Point-to-Multipoint LSPs for an MBGP MVPN
• Using Wildcards to Configure Selective Point-to-Multipoint LSPs for an MBGP MVPN
• Configuring a Selective Provider Tunnel Using Wildcards
• Example: Configuring Selective Provider Tunnels Using Wildcards
• Tracing MBGP MVPN Traffic and Operations