Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
RADIUS Attributes for L2TP
The Junos OS supports the following types of RADIUS attributes for L2TP:
- Juniper Networks vendor-specific attributes
- Attribute-value pairs (AVPs) defined by the Internet Engineering Task Force (IETF)
- RADIUS accounting stop and start AVPs
Juniper Networks vendor-specific RADIUS attributes are described in RFC 2865, Remote Authentication Dial In User Service (RADIUS). These attributes are encapsulated with the vendor ID set to the Juniper Networks ID number 2636. Table 33 lists the Juniper Networks vendor-specific attributes you can configure for L2TP.
Table 33: Juniper Networks Vendor-Specific RADIUS Attributes for L2TP
Attribute Name | Standard Number | Value |
|---|---|---|
Juniper-Primary-DNS | 31 | IP address |
Juniper-Primary-WINS | 32 | IP address |
Juniper-Secondary-DNS | 33 | IP address |
Juniper-Secondary-WINS | 34 | IP address |
Juniper-Interface-ID | 35 | String |
Juniper-IP-Pool-Name | 36 | String |
Juniper-Keep-Alive | 37 | Integer |
Table 34 lists the IETF RADIUS AVPs supported for LT2P.
Table 34: Supported IETF RADIUS Attributes for L2TP
Attribute Name | Standard Number | Value |
|---|---|---|
User-Name | 1 | String |
User-Password | 2 | String |
CHAP-Password | 3 | String |
NAS-IP-Address | 4 | IP address |
NAS-Port | 5 | Integer |
Service-Type | 6 | Integer |
Framed-Protocol | 7 | Integer |
Framed-IP-Address | 8 | IP address |
Framed-IP-Netmask | 9 | IP address |
Framed-MTU | 12 | Integer |
Framed-Route | 22 | String |
Session-Timeout | 27 | Integer |
Idle-Timeout | 28 | Integer |
Called-Station-ID | 30 | String |
Calling-Station-ID | 31 | String |
CHAP-Challenge | 60 | String |
NAS-Port-Type | 61 | Integer |
Framed-Pool | 88 | Integer |
Table 35 lists the supported RADIUS accounting start AVPs for L2TP.
Table 35: Supported RADIUS Accounting Start Attributes for L2TP
Attribute Name | Standard Number | Value |
|---|---|---|
User-Name | 1 | String |
NAS-IP-Address | 4 | IP address |
NAS-Port | 5 | Integer |
Service-Type | 6 | Integer |
Framed-Protocol | 7 | Integer |
Framed-IP-Address | 8 | IP address |
Called-Station-ID | 30 | String |
Calling-Station-ID | 31 | String |
Acct-Status-Type | 40 | Integer |
Acct-Delay-Time | 41 | Integer |
Acct-Session-ID | 44 | String |
Acct-Authentic | 45 | Integer |
NAS-Port-Type | 61 | Integer |
Tunnel-Client-Endpoint | 66 | String |
Tunnel-Server-Endpoint | 67 | String |
Acct-Tunnel-Connection | 68 | String |
Tunnel-Client-Auth-ID | 90 | String |
Tunnel-Server-Auth-ID | 91 | String |
Table 36 lists the supported RADIUS accounting stop AVPs for L2TP.
Table 36: Supported RADIUS Accounting Stop Attributes for L2TP
Attribute Name | Standard Number | Value |
|---|---|---|
User-Name | 1 | String |
NAS-IP-Address | 4 | IP address |
NAS-Port | 5 | Integer |
Service-Type | 6 | Integer |
Framed-Protocol | 7 | Integer |
Framed-IP-Address | 8 | IP address |
Called-Station-ID | 30 | String |
Calling-Station-ID | 31 | String |
Acct-Status-Type | 40 | Integer |
Acct-Delay-Time | 41 | Integer |
Acct-Input-Octets | 42 | Integer |
Acct-Output-Octets | 43 | Integer |
Acct-Session-ID | 44 | String |
Acct-Authentic | 45 | Integer |
Acct-Session-Time | 46 | Integer |
Acct-Input-Packets | 47 | Integer |
Acct-Output-Packets | 48 | Integer |
Acct-Terminate-Cause | 49 | Integer |
Acct-Multi-Session-ID | 50 | String |
Acct-Link-Count | 51 | Integer |
NAS-Port-Type | 61 | Integer |
Tunnel-Client-Endpoint | 66 | String |
Tunnel-Server-Endpoint | 67 | String |
Acct-Tunnel-Connection | 68 | String |
Tunnel-Client-Auth-ID | 90 | String |
Tunnel-Server-Auth-ID | 91 | String |
