Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Format for Specifying Filenames and URLs in Junos OS CLI Commands
In some command-line interface (CLI) commands and configuration statements—including file copy, file archive, load, save, set system login user username authentication load-key-file, and request system software add—you can include a filename. On a routing matrix, you can include chassis information (for example, lcc0, lcc0-re0, or lcc0-re1) as part of the filename. A routing matrix is a multichassis architecture composed of either one TX Matrix router and from one to four T640 routers connected to the TX Matrix router, or one TX Matrix Plus router and from one to four T1600 routers connected to the TX Matrix Plus router. From the perspective of the user interface, the routing matrix appears as a single router. On a routing matrix composed of the TX Matrix router and T640 routers, the TX Matrix router controls all the T640 routers. On a routing matrix composed of a TX Matrix Plus router and T1600 routers, the TX Matrix Plus router controls all the T1600 routers.
You can specify a filename or URL in one of the following ways:
- filename—File in the
user’s current directory on the local CompactFlash card. You
can use wildcards to specify multiple source files or a single destination
file. Wildcards are not supported in Hypertext Transfer Protocol (HTTP)
or FTP.
Note: Wildcards are supported only by the file (compare | copy | delete | list | rename | show) commands. When you issue the file show command with a wildcard, it must resolve to one filename.
- path/filename—File on the local flash disk.
- /var/filename or /var/path/filename—File on
the local hard disk. You can also specify a file on a local Routing
Engine for a specific T640 router or a T1600 router in a routing matrix:
user@host> file delete lcc0-re0:/var/tmp/junk - a:filename or a:path/filename—File on the local removable media. The default path is / (the root-level directory). The removable media can be in MS-DOS or UNIX (UFS) format.
- hostname:/path/filename, hostname:filename, hostname:path/filename, or “scp://hostname/path/filename”—File on an scp/ssh client. This form is not available in the worldwide version of the Junos OS. The default path is the user’s home directory on the remote system. You can also specify hostname as username@hostname.
- ftp://hostname/path/filename—File on an FTP server.
You can also specify hostname as username@hostname or username:password@hostname. The default path is the user’s home
directory. To specify an absolute path, the path must start with %2F; for example, ftp://hostname/%2Fpath/filename.
To have the system prompt you for the password, specify prompt in place of the password. If a password is required, and you do
not specify the password or prompt, an error message is displayed:
user@host> file copy ftp://username@ftp.hostname.net//filenamefile copy ftp.hostname.net: Not logged in.
user@host> file copy ftp://username:prompt@ftp.hostname.net//filenamePassword for username@ftp.hostname.net:
- http://hostname/path/filename—File on an HTTP server. You can also specify hostname as username@hostname or username:password@hostname. If a password is required and you omit it, you are prompted for it.
- re0:/path/filename or re1:/path/filename—File on a local Routing Engine. You can also specify
a file on a local Routing Engine for a specific T640 router or a T1600
router in a routing matrix:
user@host> show log lcc0-re1:chassisdA routing matrix is a multichassis architecture composed of either one TX Matrix router and from one to four T640 routers connected to the TX Matrix router, or one TX Matrix Plus router and from one to four T1600 routers. From the perspective of the user interface, the routing matrix appears as a single router. On a routing matrix composed of the TX Matrix router and T640 routers, the TX Matrix router controls all the T640 routers. On a routing matrix composed of a TX Matrix Plus router and T1600 routers, the TX Matrix Plus router controls all the T1600 routers.
