Router Chassis Configuration Guidelines

This chapter includes the following topics:

• Router Chassis Configuration Statements
• Configuring the Junos OS to Make a Flexible PIC Concentrator Stay Offline
• Configuring the Junos OS to Make an SFM Stay Offline
• Configuring the Junos OS to Resynchronize FPC Sequence Numbers with Active FPCs when an FPC Comes Online
• Configuring the Junos OS for Supporting Aggregated Devices
• Configuring the Junos OS to Use ATM Cell-Relay Accumulation Mode on an ATM1 PIC
• Configuring Port-Mirroring Instances
• Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs for MX Series Routers
• Examples: Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs on MX Series Routers
• Configuring ECMP Next Hops for RSVP and LDP LSPs for Load Balancing
• 16-Port 10-Gigabit Ethernet MPC on MX Series Routers (16x10GE 3D MPC) Overview
• Configuring the Number of Active Ports on a 16-Port 10-Gigabit Ethernet MPC on MX Series Routers
• Configuring Tunnel Interfaces on an MX Series Router with a 16x10GE 3D MPC
• Configuring the Power-On Sequence for DPCs on MX Series Routers with the Enhanced AC PEM
• Configuring the Junos OS to Determine the Conditions That Trigger Alarms
• Configuring the Junos OS to Enable Service Packages on Adaptive Services Interfaces
• Configuring the Junos OS to Support Layer 2 Services on MX Series Ethernet Services Routers with MS-DPCs
• Configuring the Junos OS to Enable Session Offloading on MX Series Ethernet Services Routers with MS-DPCs
• Configuring the Junos OS to Enable SONET/SDH Framing for SONET/SDH PICs
• Configuring the Junos OS to Support an External Clock Synchronization Interface for M Series and T Series Routers
• Configuring the Junos OS to Support the Sparse DLCI Mode on Channelized STM1 or Channelized DS3 PICs
• Configuring the Junos OS to Enable a SONET PIC to Operate in Channelized (Multiplexed) Mode
• Configuring Channelized DS3-to-DS0 Naming
• Configuring the Junos OS to Support Eight Queues on IQ Interfaces for T Series and M320 Routers
• Configuring Channel Groups and Time Slots for a Channelized E1 Interface
• Configuring the Junos OS to Support Channelized STM1 Interface Virtual Tributary Mapping
• Configuring the Junos OS to Enable ATM2 Intelligent Queuing Layer 2 Circuit Transport Mode
• Configuring the Junos OS to Support ILMI for Cell Relay Encapsulation on an ATM2 IQ PIC
• Configuring the Junos OS to Support Tunnel Interfaces on MX Series Ethernet Services Routers
• Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC
• Example: Configuring Tunnel Interfaces on a 10-Gigabit Ethernet 4-Port DPC
• Configuring the Junos OS to Enable an M160 Router to Operate in Packet Scheduling Mode
• Configuring the Junos OS to Allocate More Memory for Routing Tables
• Configuring the Link Services PIC for Multilink Protocol Support
• Configuring the Junos OS to Enable Idle Cell Format and Payload Patterns for ATM Devices
• Configuring the Junos OS to Enable MTU Path Check for a Routing Instance on M Series Routers
• Configuring the Junos OS to Support Redundancy on Routers Having Multiple Routing Engines or Switching Boards
• Configuring the Junos OS to Support FPC to FEB Connectivity on M120 Routers
• Configuring the Junos OS to Enable a Routing Engine to Reboot on Hard Disk Errors
• Configuring the Junos OS to Prevent the Resetting of the Factory Default or Rescue Configuration During Current Configuration Failure on J Series Routers
• Configuring Larger Delay Buffers to Prevent Congestion And Packet Dropping
• Configuring the Junos OS to Support Entry-Level Configuration on an M320 Router with a Minimum Number of SIBs and PIMs
• Configuring the uPIM to Run in Switching or Routing Mode on J Series Routers
• Configuring the IP and Ethernet Services Mode in MX Series Routers
• Configuring J Series Services Router Switching Interfaces
• Example: Configuring J Series Services Router Switching Interfaces
• TX Matrix Router and T640 Router Configuration Guidelines
• TX Matrix Plus Router and T1600 Router Configuration Guidelines
• Configuring the Junos OS to Upgrade the T1600 Router Chassis to LCC0 of a TX Matrix Plus Routing Platform
• Associating Sampling Instances for Active Flow Monitoring with a Specific Packet Forwarding Engine