max-burst-size (RTCP Streams)

Syntax

max-burst-size {rtcp {(fixed-value bytes | percentage percentage);}}

Hierarchy Level

[edit services pgcp gateway gateway-name h248-properties traffic-management]

Release Information

Statement introduced in Junos OS Release 9.2.

maximum and minimum options introduced in Junos OS Release 9.5.

Description

Configure the maximum burst size for for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate’s rate.

Default

The virtual BGF uses the default value of 100 percent of the RTP gate's maximum burst size if the Policy command in H.248 messages in ON and both of the following apply:

The maximum burst size is not set in the H.248 message.
There is no CLI configuration for maximum burst size.

Options

fixed-value —Value entered is a fixed number of bytes per second.

bytes-per-second—maximum burst size.

Range: 20 through 4,294,967,295

percentage —Value entered is a percentage of the RTP gate’s rate.

percentage—Maximum burst size as a percentage of the RTP gate's rate.

Range: 1 through 1000

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.