peak-data-rate (RTCP)

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 9.2.

Description

Configure the peak data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate’s rate.

Default

The BGF uses the default value of 5 percent of the RTP gate's rate if the Policy command in H.248 messages in ON and both of the following apply:

• The peak data rate is not set in the H.248 message.
• There is no CLI configuration for peak data rate.

Options

fixed-value —Value entered is a fixed number of bits per second.

bytes-per-second—Peak data rate.

Range: 125 through 4,294,967,295

percentage —Value entered is a percentage of the RTP gate’s rate.

percentage—Value entered is a percentage of the RTP’s gate rate.

Range: 0 through 1000

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG