thresholds

Syntax

Hierarchy Level

Release Information

Statement introduced before Junos OS Release 7.4.

Description

Specify thresholds used for the probes. A system log message is generated when the configured threshold is exceeded. Likewise, an SNMP trap (if configured) is generated when a threshold is exceeded.

Options

thresholds—Specify one or more threshold measurements. The following options are supported:

• egress-time—Measures maximum source-to-destination time per probe.
• ingress-time—Measures maximum destination-to-source time per probe.
• jitter-egress—Measures maximum source-to-destination jitter per test.
• jitter-ingress—Measures maximum destination-to- source jitter per test.
• jitter-rtt—Measures maximum jitter per test, from 0 through 60,000,000 microseconds.
• rtt—Measures maximum round-trip time per probe, in microseconds.
• std-dev-egress—Measures maximum source-to-destination standard deviation per test.
• std-dev-ingress—Measures maximum destination-to-source standard deviation per test.
• std-dev-rtt—Measures maximum standard deviation per test, in microseconds.
• successive-loss—Measures successive probe loss count, indicating probe failure.
• total-loss—Measures total probe loss count indicating test failure, from 0 through 15.

Usage Guidelines

See Configuring RPM Probes.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.