Real-Time Performance Monitoring Configuration Guidelines

To configure Real-Time Performance Monitoring (RPM) services, include the rpm statement at the [edit services] hierarchy level:

[edit services]

rpm {bgp {data-fill data;data-size size;destination-port port;history-size size;logical-system logical-system-name [routing-instances routing-instance-name];probe-count count;probe-interval seconds;probe-type type;routing-instances instance-name;test-interval interval;}probe owner {test test-name {data-fill data;data-size size;destination-interface interface-name;destination-port port;dscp-code-point dscp-bits;hardware-timestamp;history-size size;moving-average-size number;one-way-hardware-timestamp;probe-count count;probe-interval seconds;probe-type type;routing-instance instance-name;source-address address;target (url url | address address);test-interval interval;thresholds thresholds;traps traps;}}probe-server {tcp {destination-interface interface-name;port number;}udp {destination-interface interface-name;port number;}}probe-limit limit;twamp {server {authentication-mode (authenticated | encrypted | none);client-list list-name {[ address address ];}inactivity-timeout seconds;maximum-connections count;maximum-connections-per-client count;maximum-sessions count;maximum-sessions-per-connection count;port number;}}}

Note: RPM does not require an Adaptive Services (AS) or Multiservices PIC or Multiservices Dense Port Concentrator (DPC) unless you are configuring RPM timestamping as described in Configuring RPM Timestamping.

This chapter includes the following sections: