show interfaces redundancy (SDK)

Syntax

Release Information

For routers running Junos SDK applications, support for rms interfaces added in Junos OS Release 9.5.

Description

Display general information about the Multiservices interfaces redundancy (rms interface).

For this command’s usage in other contexts, see the Junos Interfaces Command Reference.

Required Privilege Level

view

List of Sample Output

Output Fields

For a description of the output fields, see the output fields table for the show interfaces redundancy command in the Junos Interfaces Command Reference.

show interfaces redundancy both up

Interface  State            Last change  Primary    Secondary  Current status
rms0       On primary       01:02:45     ms-0/0/0   ms-0/2/0   both up       

show interfaces redundancy one or both down

Interface  State         Last change  Primary    Secondary  Current status
    rms0      Not present                ms-1/0/0  ms-0/2/0   both down
    rms1      On secondary  1d 23:56     ms-1/2/0  ms-0/3/0   primary down
    rms2      On primary    10:10:27     ms-1/3/0  ms-0/2/0   secondary down