•  Junos 10.2 Multicast Protocols Configuration Guide
  •  Copyright and Trademark Information
  •  Table of Contents
  •  List of Figures
  •  List of Tables
  •   About This Guide
    •  Junos Documentation and Release Notes
    •  Objectives
    •  Audience
    •  Supported Platforms
    •  Using the Indexes
    •  Using the Examples in This Manual
    •  Documentation Conventions
    •  Documentation Feedback
    •  Requesting Technical Support
  •    Multicast Protocols
    •   Multicast Overview
      •   Multicast Overview
        •  Comparing Multicast to Unicast
        •  IP Multicast Uses
        •  IP Multicast Terminology
        •  Multicast Leaf and Branch Terminology
        •  Dense and Sparse Modes for Multicast Networks
        •  IP Multicast Addressing
        •  Multicast Addresses
        •  Layer 2 Frames and IPv4 Multicast Addresses
        •  Multicast Interface Lists
        •  Multicast Routing Protocols
        •  T Series Router Multicast Performance
      •  Junos OS Multicast Standards
      •  IP Multicast Specifications
    •   Group Membership
      •  Group Membership Protocols Overview
      •   IGMP
        •  IGMP Overview
        •  Configuring IGMP
        •  Enabling IGMP
        •  Modifying the IGMP Host-Query Message Interval
        •  Modifying the IGMP Query Response Interval
        •  Specifying Immediate-Leave Host Removal for IGMP
        •  Filtering Unwanted IGMP Reports at the IGMP Interface Level
        •  Accepting IGMP Messages from Remote Subnetworks
        •  Modifying the IGMP Last-Member Query Interval
        •  Modifying the IGMP Robustness Variable
        •  Limiting the Maximum IGMP Message Rate
        •  Changing the IGMP Version
        •  Enabling IGMP Static Group Membership
        •  Recording IGMP Join and Leave Events
        •  Tracing IGMP Protocol Traffic
        •  Disabling IGMP
        •  IGMP and Nonstop Active Routing
      •   MLD
        •  MLD Overview
        •  Configuring MLD
        •  Enabling MLD
        •  Modifying the MLD Version
        •  Modifying the MLD Host-Query Message Interval
        •  Modifying the MLD Query Response Interval
        •  Modifying the MLD Last-Member Query Interval
        •  Specifying Immediate-Leave Host Removal for MLD
        •  Filtering Unwanted MLD Reports at the MLD Interface Level
        •  Example: Modifying the MLD Robustness Variable
        •  Limiting the Maximum MLD Message Rate
        •  Enabling MLD Static Group Membership
        •  Example: Recording MLD Join and Leave Events
        •  Tracing MLD Protocol Traffic
        •  Disabling MLD
    •   SAP and SDP
      •  SAP Overview
      •  SAP Configuration Guidelines
    •   PIM
      •   PIM Basics
        •   PIM Background
          •  Basic PIM Network Components
          •  PIM Modes of Operation
        •  PIM Mode-Independent Configuration Overview
        •  PIM Configuration Statements
        •  Changing the PIM Version
        •  Modifying the PIM Hello Interval
        •  Preserving Multicast Performance by Disabling Response to the ping Utility
        •  Configuring PIM Trace Options
        •   Disabling PIM
          •  Disabling the PIM Protocol
          •  Disabling PIM on an Interface
          •  Disabling PIM for a Family
          •  Disabling PIM for a Rendezvous Point
      •   PIM Designated Router
        •  Configuring Interface Priority to Become the PIM Designated Router
        •  Configuring PIM Designated Router Election on Point-to-Point Links
      •   PIM Sparse Mode
        •   PIM Sparse Mode Overview
          •  Rendezvous Point
          •  RP Mapping Options
        •  Designated Router
        •  Tunnel Services PICs and Multicast
        •  Enabling PIM Sparse Mode
        •  Configuring PIM Join Load Balancing
        •  Modifying the Join State Timeout
        •  Example: Enabling Join Suppression
        •  Example: Configuring PIM Sparse Mode over an IPsec VPN
        •  Example: Configuring Multicast for Virtual Routers with IPv6 Interfaces
      •   Static RP
        •  Static RP Overview
        •  Configuring Local PIM RPs
        •  Configuring the Static PIM RP Address on the Non-RP Routing Device
      •   Anycast RP
        •  RP Mapping with Anycast RP
        •  Example: Configuring Multiple RPs in a Domain with Anycast RP
        •  Example: Configuring PIM Anycast with or without MSDP
        •  Configuring a PIM Anycast RP Router Using Only PIM
      •   PIM Bootstrap Router
        •  Bootstrap Router Overview
        •  Configuring PIM Bootstrap Properties for IPv4
        •  Configuring PIM Bootstrap Properties for IPv4 or IPv6
        •  Example: Rejecting PIM Bootstrap Messages at the Boundary of a PIM Domain
        •  Example: Configuring PIM BSR Filters
      •   PIM Auto-RP
        •  Auto-RP Overview
        •  Configuring PIM Auto-RP
      •   Embedded RP
        •  Embedded RP for IPv6 Multicast
        •  Configuring PIM Embedded RP for IPv6
      •   PIM Filtering
        •  Filtering Multicast Messages
        •  Filtering MAC Addresses
        •  Filtering RP/DR Register Messages
        •  Filtering MSDP SA Messages
        •  Configuring Interface-Level PIM Neighbor Policies
        •  Filtering Outgoing PIM Join Messages
        •  Filtering Incoming PIM Join Messages
        •  Configuring Register Message Filters on a PIM RP and DR
      •   PIM RPT and SPT Cutover
        •  Multicast Rendezvous Points, Shared Trees, and the Rendezvous-Point Trees
        •  Building an RPT Between RP and Receivers
        •  PIM Sparse-Mode Source Registration
        •  Multicast Shortest-Path Tree
        •  PIM Sparse-Mode SPT Cutover
        •  SPT Cutover
        •  SPT Cutover Control
        •  Example: Configuring the PIM Assert Timeout
        •  Example: Configuring the PIM SPT Threshold Policy
      •   PIM and the BFD Protocol
        •   Overview of BFD Authentication for PIM
          •  BFD Authentication Algorithms
          •  Security Authentication Keychains
          •  Strict Versus Loose Authentication
        •  Configuring the BFD Protocol for PIM
        •   Configuring BFD Authentication for PIM
          •  Configuring BFD Authentication Parameters
          •  Viewing Authentication Information for BFD Sessions
      •   PIM Graceful Restart
        •  Configuring Nonstop Active Routing with PIM
        •  Configuring PIM Sparse Mode Graceful Restart
      •   PIM Dense Mode
        •  PIM Dense Mode Overview
        •  Configuring PIM Dense Mode Properties
      •   PIM Sparse-Dense Mode
        •  Mixing PIM Sparse and Dense Modes
        •  PIM Sparse-Dense Mode
        •  Configuring PIM Sparse-Dense Mode Properties
    •   DVMRP
      •  DVMRP Overview
      •   DVMRP
        •  Configuring DVMRP
        •  Example: Configuring DVMRP
        •  Example: Configuring DVMRP to Announce Unicast Routes
        •  Tracing DVMRP Protocol Traffic
    •   MSDP
      •  MSDP Overview
      •   MSDP
        •  Configuring MSDP
        •  Example: Configuring MSDP
        •  Example: Configuring MSDP in a Routing Instance
        •  Configuring the Interface to Accept Traffic from a Remote Source
        •  Example: Configuring MSDP with Active Source Limits and Mesh Groups
        •  Example: Configuring PIM Anycast with or without MSDP
        •  Configuring a Default MSDP Peer
        •  Tracing MSDP Protocol Traffic
        •  Disabling MSDP
    •   AMT
      •  AMT Overview
      •   AMT
        •  AMT Applications
        •  AMT Operation
        •  Configuring the AMT Protocol
        •  Configuring Default IGMP Parameters for AMT Interfaces
        •  Example: Configuring the AMT Protocol
    •   Snooping
      •  Snooping Overview
      •   Multicast Snooping
        •  Multicast Snooping Overview
        •  Configuring Multicast Snooping
        •  Example: Configuring Multicast Snooping
        •  Enabling Bulk Updates for Multicast Snooping
        •  Enabling Multicast Snooping for Multichassis Link Aggregation Group Interfaces
      •   IGMP Snooping
        •  Introduction to IGMP Snooping
        •  IGMP Snooping Interfaces and Forwarding
        •  IGMP Snooping and Proxies
        •  Multicast-Router Interfaces and IGMP Snooping Proxy Mode
        •  Host-Side Interfaces and IGMP Snooping Proxy Mode
        •  IGMP Snooping and Bridge Domains
        •  Configuring IGMP Snooping
        •  Configuring VLAN-Specific IGMP Snooping Parameters
        •  Example: Configuring IGMP Snooping
        •  Configuring IGMP Snooping Trace Operations
    •   PGM
      •  Pragmatic General Multicast Overview
      •   PGM
        •  PGM Architecture and PGM Routers
        •  PGM-Enabled Source
        •  PGM-Enabled Receivers
        •  PGM-Enabled Routers
        •  PGM Configuration Guidelines
    •   Multicast Routing Options
      •   Administrative Scoping
        •  Multicast Administrative Scoping
        •  Example: Creating a Named Scope for Multicast Scoping
        •  Example: Using a Scope Policy for Multicast Scoping
        •  Example: Configuring Externally Facing PIM Border Routers
      •   Reverse Path Forwarding
        •   Multicast Reverse-Path Forwarding
          •  RPF Table
        •  Multicast RPF Configuration Guidelines
        •  Configuring a PIM RPF Routing Table
        •  Example: Configuring RPF Policies
      •   Source-Specific Multicast
        •  PIM Source-Specific Mode Overview
        •  PIM SSM
        •  Source-Specific Multicast Groups Overview
        •  Example: Configuring Source-Specific Multicast Groups with Any-Source Override
        •  Example: Configuring an SSM-Only Domain
        •  Example: Configuring PIM SSM on a Network
        •  Example: Configuring SSM Mapping
      •   Bandwidth Management
        •  Bandwidth Management Overview
        •  Bandwidth Management and PIM Graceful Restart
        •  Bandwidth Management and Source Redundancy
        •  Logical Systems and Bandwidth Oversubscription
        •  How Interface Bandwidth Becomes Oversubscribed
        •  How Interface Bandwidth Becomes Available Again
        •  Readmitting or Removing Interfaces
        •  Example: Defining Interface Bandwidth Maximums
        •  Example: Configuring Multicast with Subscriber VLANs
        •  Configuring Multicast Routing Over IP Demux Interfaces
        •  Classifying Packets by Egress Interface
      •   Forwarding Cache
        •  Multicast Forwarding Cache Overview
        •  Example: Configuring the Multicast Forwarding Cache
        •  Example: Configuring a Multicast Flow Map
      •   Ingress PE Redundancy
        •  Ingress PE Redundancy Configuration Overview
        •  Example: Configuring Ingress PE Redundancy
      •   Message Translation
        •  PIM-to-IGMP and PIM-to-MLD Message Translation Overview
        •  Configuring PIM-to-IGMP Message Translation
        •  Configuring PIM-to-MLD Message Translation
  •   Multicast VPNs
    •   MVPN Overview
      •  Multicast over Layer 3 VPNs
      •  Dual PIM Multicast VPNs
    •   MBGP MVPNs
      •   MBGP MVPNs Overview
        •  Introduction
        •  Applications
        •  MBGP MPLS Multicast VPN Sites
        •  Multicast VPN Standards
        •  PIM Sparse Mode, PIM Dense Mode, Auto-RP, and BSR for MBGP MVPNs
        •  MBGP-Based Multicast VPN Trees
      •   MBGP MVPNs Configuration
        •  Introduction to Configuring MBGP MVPNs
        •  Configuring Routing Instances for an MBGP MVPN
        •  Configuring SPT-Only Mode for Multiprotocol BGP-Based Multicast VPNs
        •  Configuring Shared-Tree Data Distribution Across Provider Cores for Providers of MBGP MVPNs
        •   Configuring VRF Route Targets for Routing Instances for an MBGP MVPN
          •  Configuring the Export Target for an MBGP MVPN
          •   Configuring the Import Target for an MBGP MVPN
            •  Configuring the Import Target Receiver and Sender for an MBGP MVPN
            •  Configuring the Import Target Unicast Parameters for an MBGP MVPN
        •  Limiting Routes to Be Advertised by an MVPN VRF Instance
        •  Configuring NLRI Parameters for an MBGP MVPN
        •  Configuring PIM Provider Tunnels for an MBGP MVPN
        •  Configuring PIM-SSM GRE Selective Provider Tunnels
        •   Configuring Point-to-Multipoint LSPs for an MBGP MVPN
          •  Configuring Inclusive Point-to-Multipoint LSPs for an MBGP MVPN
          •   Configuring Selective Provider Tunnels for an MBGP MVPN
            •  Configuring the Multicast Group Address for an MBGP MVPN
            •  Configuring the Multicast Source Address for an MBGP MVPN
            •  Configuring Static Selective Point-to-Multipoint LSPs for an MBGP MVPN
            •  Configuring Dynamic Selective Point-to-Multipoint LSPs for an MBGP MVPN
            •  Configuring the Threshold for Dynamic Selective Point-to-Multipoint LSPs for an MBGP MVPN
            •  Configuring the Tunnel Limit for Dynamic Selective Point-to-Multipoint LSPs for an MBGP MVPN
        •   Wildcards
          •   Using Wildcards to Configure Selective Point-to-Multipoint LSPs for an MBGP MVPN
            •  About S-PMSI
            •  Scenarios for Using Wildcard S-PMSI
            •  Types of Wildcard S-PMSI
            •  Differences Between Wildcard S-PMSI and (S,G) S-PMSI
            •  Wildcard (*,*) S-PMSI and PIM Dense Mode
            •  Wildcard (*,*) S-PMSI and PIM-BSR
            •  Wildcard Source and the 0.0.0.0/0 Source Prefix
          •  Configuring a Selective Provider Tunnel Using Wildcards
          •  Example: Configuring Selective Provider Tunnels Using Wildcards
        •  Tracing MBGP MVPN Traffic and Operations
        •  Example: Configuring MBGP Multicast VPNs
        •  Example: Configuring a PIM-SSM Provider Tunnel for an MBGP MVPN
        •  Example: Allowing MBGP MVPN Remote Sources
      •   MBGP MVPN Extranets
        •   MBGP Multicast VPN Extranets Overview
          •  MBGP Multicast VPN Extranets Application
        •  MBGP Multicast VPN Extranets Configuration Guidelines
        •  Example: Configuring MBGP Multicast VPN Extranets
    •   Draft-Rosen MVPNs
      •   Draft-Rosen MVPNs Overview
        •  Draft-Rosen Multicast VPNs Overview
        •  Data MDTs Overview
        •  Data MDT Characteristics
        •  Draft-Rosen Multicast VPN Autodiscovery
        •  Draft-Rosen Multicast VPN Control Plane
        •  Interoperating with Other Vendors
        •  Configuring Draft-Rosen Multicast VPNs
      •   Draft-Rosen MVPNs Configuration
        •  Example: Configuring Data MDTs and Provider Tunnels Operating in Any-Source Multicast Mode
        •  Example: Enabling Dynamic Reuse of Data MDT Group Addresses
        •  Example: Configuring Any-Source Multicast for Draft-Rosen VPNs
        •  Example: Configuring PIM Dense Mode over Layer 3 VPNs
        •  Example: Configuring PIM Sparse Mode over Layer 3 VPNs
        •  Load Balancing Multicast Tunnel Interfaces Among Available PICs
        •  Example: Configuring Source-Specific Multicast for Draft-Rosen Multicast VPNs
        •  Example: Configuring Draft Rosen Interoperability and a VPN Tunnel Source
  •   Configuration Statements
    •   Complete Multicast Configuration Statements
      •  Multicast Configuration Statements Overview
      •  [edit bridge-domains bridge-domain-name protocols] Hierarchy Level
      •  [edit logical-systems protocols] Hierarchy Level
      •  [edit logical-systems routing-instances] Hierarchy Level
      •  [edit logical-systems routing-options] Hierarchy Level
      •  [edit protocols] Hierarchy Level
      •  [edit routing-instances] Hierarchy Level
      •  [edit routing-options] Hierarchy Level
    •   Summary of IGMP Configuration Statements
      •  accounting (Per Interface)
      •  accounting (Protocol)
      •  disable
      •  exclude
      •  group
      •  group-count
      •  group-increment
      •  group-policy
      •  igmp
      •  immediate-leave
      •  interface
      •  maximum-transmit-rate
      •  no-accounting
      •  oif-map
      •  passive (IGMP)
      •  promiscuous-mode
      •  query-interval
      •  query-last-member-interval
      •  query-response-interval
      •  robust-count
      •  source
      •  source-count
      •  source-increment
      •  ssm-map
      •  static
      •  traceoptions
      •  version
    •   Summary of MLD Configuration Statements
      •  accounting (Per Interface)
      •  accounting (Protocol)
      •  disable
      •  exclude
      •  group
      •  group-count
      •  group-increment
      •  group-policy
      •  immediate-leave
      •  interface
      •  maximum-transmit-rate
      •  mld
      •  no-accounting
      •  oif-map
      •  passive (MLD)
      •  query-interval
      •  query-last-member-interval
      •  query-response-interval
      •  robust-count
      •  source
      •  source-count
      •  source-increment
      •  ssm-map
      •  static
      •  traceoptions
      •  version
    •   Summary of SAP Configuration Statements
      •  disable
      •  listen
      •  sap
    •   Summary of PIM Configuration Statements
      •  accept-remote-source
      •  address (Anycast RPs)
      •  address (Local RPs)
      •  address (Static RPs)
      •  algorithm
      •  anycast-pim
      •  assert-timeout
      •  authentication
      •  auto-rp
      •  bfd-liveness-detection
      •  bootstrap
      •  bootstrap-export
      •  bootstrap-import
      •  bootstrap-priority
      •  dense-groups
      •  disable (PIM Graceful Restart)
      •  disable (PIM)
      •  dr-election-on-p2p
      •  dr-register-policy
      •  embedded-rp
      •  export (Bootstrap)
      •  export (PIM)
      •  family (Bootstrap)
      •  family (Disable PIM)
      •  family (Local RP)
      •  graceful-restart
      •  group-ranges
      •  hello-interval
      •  hold-time
      •  import (Bootstrap)
      •  import (PIM)
      •  infinity
      •  interface
      •  join-prune-timeout
      •  join-load-balance
      •  key-chain
      •  local
      •  local-address
      •  loose-check
      •  mapping-agent-election
      •  maximum-rps
      •  minimum-interval
      •  minimum-receive-interval
      •  mode
      •  multiplier
      •  neighbor-policy
      •  override-interval
      •  pim
      •  priority (Bootstrap)
      •  priority (PIM Interfaces)
      •  priority (PIM RPs)
      •  propagation-delay
      •  reset-tracking-bit
      •  restart-duration
      •  rib-group
      •  rp
      •  rp-register-policy
      •  rp-set
      •  spt-threshold
      •  static
      •  traceoptions
      •  tunnel-devices
      •  version (BFD)
      •  version (PIM)
      •  vpn-group-address
    •   Summary of DVMRP Configuration Statements
      •  disable
      •  dvmrp
      •  export
      •  hold-time
      •  import
      •  interface
      •  metric
      •  mode
      •  rib-group
      •  traceoptions
    •   Summary of MSDP Configuration Statements
      •  active-source-limit
      •  authentication-key
      •  data-encapsulation
      •  default-peer
      •  disable
      •  export
      •  group
      •  import
      •  local-address
      •  maximum
      •  mode
      •  msdp
      •  peer
      •  rib-group
      •  source
      •  threshold
      •  traceoptions
    •   Summary of AMT Configuration Statements
      •  accounting
      •  amt (IGMP)
      •  amt (Protocols)
      •  anycast-prefix
      •  defaults
      •  family
      •  group-policy
      •  inet
      •  local-address
      •  query-interval
      •  query-response-interval
      •  relay (IGMP)
      •  relay (Protocols)
      •  robust-count
      •  secret-key-timeout
      •  ssm-map
      •  traceoptions
      •  tunnel-limit
      •  version
    •   Summary of Multicast Snooping Configuration Statements
      •  flood-groups
      •  forwarding-cache
      •  graceful-restart
      •  ignore-stp-topology-change
      •  multicast-snooping-options
      •  multichassis-lag-replicate-state
      •  nexthop-hold-time
      •  threshold
      •  traceoptions
    •   Summary of IGMP Snooping Configuration Statements
      •  group
      •  group-limit
      •  host-only-interface
      •  igmp-snooping
      •  immediate-leave
      •  interface
      •  multicast-router-interface
      •  proxy
      •  query-interval
      •  query-last-member-interval
      •  query-response-interval
      •  robust-count
      •  source
      •  source-address
      •  static
      •  traceoptions
      •  vlan
    •   Summary of PGM Configuration Statements
      •  pgm
      •  traceoptions
    •   Summary of Multicast Routing Options Configuration Statements
      •  asm-override-ssm
      •  backup-pe-group
      •  backups
      •  bandwidth
      •  flow-map
      •  forwarding-cache (Flow Maps)
      •  forwarding-cache (Multicast)
      •  interface (Routing Options)
      •  interface (Scoping)
      •  local-address
      •  maximum-bandwidth
      •  multicast
      •  no-qos-adjust
      •  pim-to-igmp-proxy
      •  pim-to-mld-proxy
      •  policy (Flow Maps)
      •  policy (SSM Maps)
      •  prefix
      •  redundant-sources
      •  reverse-oif-mapping
      •  rpf-check-policy
      •  scope
      •  scope-policy
      •  source
      •  ssm-groups
      •  ssm-map
      •  subscriber-leave-timer
      •  threshold
      •  timeout (Flow Maps)
      •  timeout (Multicast)
      •  upstream-interface
    •   Summary of MBGP MVPN Configuration Statements
      •  export-target
      •  family (VRF Advertisement)
      •  group
      •  group-range (MBGP MVPN Tunnel)
      •  import-target
      •  inet-mvpn (BGP)
      •  inet-mvpn (VRF Advertisement)
      •  inet6-mvpn (BGP)
      •  inet6-mvpn (VRF Advertisement)
      •  label-switched-path-template
      •  mvpn
      •  mvpn-mode
      •  pim-asm
      •  pim-ssm (Selective Tunnel)
      •  provider-tunnel
      •  route-target
      •  rpt-spt
      •  rsvp-te
      •  selective
      •  source
      •  spt-only
      •  static-lsp
      •  target
      •  threshold-rate
      •  traceoptions
      •  tunnel-limit
      •  unicast
      •  vrf-advertise-selective
      •  wildcard-group-inet
      •  wildcard-group-inet6
      •  wildcard-source
    •   Summary of Draft-Rosen MVPN Configuration Statements
      •  autodiscovery
      •  autodiscovery-only
      •  data-mdt-reuse
      •  default-vpn-source
      •  group
      •  group-address
      •  group-range (Data MDTs)
      •  inclusive
      •  inet-mdt
      •  interface-name
      •  intra-as
      •  mdt
      •  mvpn (Control Plane Autodiscovery)
      •  mvpn (Routing Instance)
      •  pim-ssm (Provider Tunnel)
      •  rate
      •  signaling
      •  source
      •  threshold
      •  tunnel-limit
      •  unicast-umh-election
  •   Index
    •  Index
    •  Index of Statements and Commands

Symbols

#, comments in configuration statements    1

( ), in syntax descriptions    1

< >, in syntax descriptions    1

[ ], in configuration statements    1

{ }, in configuration statements    1

| (pipe), in syntax descriptions    1

A

accept-remote-source statement    1

usage guidelines    1, 2

accounting statement    

AMT interface    1

IGMP    1

IGMP interface    1

MLD    1

MLD interface    1

active-source-limit statement    1

usage guidelines    1

address statement    

anycast RPs    1

usage guidelines    1, 2

local RPs    1

static RPs    1

usage guidelines    1

addresses    

multicast    1

administrative scoping    1

algorithm statement    

BFD authentication    1

all (tracing flag)    

PGM    1

AMT    

configuration statements    1

host-query message interval    1

overview    1

protocol    

configuring    1

version    1

amt statement    

IGMP    1

IGMP defaults    

configuring    1

protocol    1

configuring    1

anycast RP    1

overview    1

anycast-pim statement    1

usage guidelines    1, 2

anycast-prefix statement    1

asm-override-ssm statement    1

assert (tracing flag)    1

assert timeout    

configuring    1

assert-timeout statement    1

usage guidelines    1

authentication configuration    

BFD    1

authentication statement    

BFD    1

BFD protocol    1

authentication-key statement    

MSDP    1

usage guidelines    1

auto-RP    1

overview    1

auto-rp statement    1

usage guidelines    1

autodiscovery    1

configuring    1

autodiscovery routes    

for S-PMSI    1

autodiscovery statement    1

usage guidelines    1

autodiscovery-only statement    1

usage guidelines    1

Automatic Multicast Tunneling     See AMT    

B

backup-pe-group statement    1

usage guidelines    1

backups statement    1

usage guidelines    1

bandwidth statement    1

usage guidelines    1

BFD    

authentication configuration    1

protocol    1

BFD authentication    

algorithm statement    1

authentication statement    1

key-chain statement    1

loose-check statement    1

bfd-liveness-detection statement    

PIM    1

usage guidelines    1

bootstrap (tracing flag)    1

bootstrap IPv4 messages    1

bootstrap messages    1, 2, 3, 4

Bootstrap Router    

overview    1

bootstrap router    1

bootstrap statement    1

bootstrap-export statement    1

usage guidelines    1

bootstrap-import statement    1

usage guidelines    1

bootstrap-priority statement    1

usage guidelines    1

braces, in configuration statements    1

brackets    

angle, in syntax descriptions    1

square, in configuration statements    1

bridge domains    

and IGMP snooping    1

BSR    1

policy, import    1

bulk updates    

enabling    1

C

cache (tracing flag)    1

CBT    

defined    1

issues    1

classification    

by egress interface    1

comments, in configuration statements    1

configuration statements    

hierarchy    

multicast    1

conventions    

text and syntax    1

Core Based Trees     See CBT    

curly braces, in configuration statements    1

customer support    1

contacting JTAC    1

D

data multicast distribution trees     See MDT    

data-encapsulation statement    1

usage guidelines    1

data-mdt-reuse statement    

PIM    1

usage guidelines    1

default multicast distribution trees     See MDT    

default-peer statement    1

usage guidelines    1, 2

default-vpn-source statement    1

usage guidelines    1

defaults statement    

AMT    1

dense-groups statement    1

usage guidelines    1

designated router    1

disable statement    

DVMRP    1

usage guidelines    1

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

MSDP    1

usage guidelines    1

PIM family    1

PIM graceful restart    1

usage guidelines    1

PIM interfaces    1

PIM protocol    1

SAP and SDP    1

usage guidelines    1, 2

Distance Vector Multicast Routing Protocol     See DVMRP    

distribution trees    

RPT    1

shared trees    1

documentation    

comments on    1

dr-election-on-p2p statement    1

PIM    

usage guidelines    1

dr-register-policy statement    1

usage guidelines    1

draft-rosen MVPNs    1, 2, 3, 4

configuration statements    1

interoperability    1

DVMRP    

configuration statements    1

defined    1

disabling    1

enabling    1, 2

hold-time period    1

metric    1, 2

overview    1

policy, routing    1, 2, 3

routing tables    1, 2

dvmrp statement    1

usage guidelines    1

E

embedded RP    

IPv6    

configuring    1

overview    1

embedded-rp statement    1

usage guidelines    1

enable IGMP static group membership    1

enable MLD static group membership    1

event recording    

IGMP    1

MLD    1

exclude statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

export statement    

DVMRP    1

usage guidelines    1

MSDP    1

usage guidelines    1

PIM    1, 2

configuring    1

PIM RP    

usage guidelines    1

export-target statement    1

usage guidelines    1

F

family statement    1

bootstrap    1

local RP    1

PIM interfaces    1

PIM protocol    1

VRF advertisement    1

flood groups    

and multicast snooping    1

flood-groups statement    

multicast snooping    1

flow-map statement    1

usage guidelines    1

font conventions    1

forwarding cache    

and multicast snooping    1

forwarding cache limits, overview    1

forwarding classes    

classifying packets by egress interface    1

forwarding-cache statement    

multicast snooping    1

usage guidelines    1, 2

forwarding-classes-interface-specific statement    

usage guidelines    1

frames    

multicast snooping    1, 2

G

graceful restart    

and multicast snooping    1

disabling    1

PIM    

sparse mode    1

sparse-dense mode    1

graceful-restart statement    

multicast snooping    1

PIM    1

usage guidelines    1

snooping    

usage guidelines    1

graft (tracing flag)    

DVMRP    1

PIM    1

group    

provider tunnel    1

group range    

MDT    1

group statement    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MDT    1

usage guidelines    1

MLD    1

usage guidelines    1

MSDP    1

usage guidelines    1

group statement, IGMP snooping    

IGMP snooping    

usage guidelines    1

group-address statement    1

usage guidelines    1

group-count statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

group-increment statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

group-limit statement    

IGMP snooping    1

group-limit statement, IGMP snooping    

IGMP snooping    

usage guidelines    1

group-policy statement    

AMT    1

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

group-range statement    1, 2

usage guidelines    1

group-ranges statement    1

usage guidelines    1

groups    

SSM    1

H

hello (tracing flag)    

PIM    1

hello-interval statement    

PIM    1

usage guidelines    1

hold-time statement    

DVMRP    1

usage guidelines    1

PIM    1

host-only-interface statement    1

host-only-interface statement, IGMP snooping    

IGMP snooping    

usage guidelines    1

I

icons defined, notice    1

IGMP    

and nonstop active routing    1

configuration statements    1, 2, 3

configuring    1, 2

configuring PIM-to-IGMP message translation    1

disabling    1

enabling    1, 2

event recording    1

flags for tracing operations    1

host-query message interval    1, 2

last-member query interval    1, 2

overview    1

PIM-to-IGMP message translation    1

query response interval    1, 2

robustness variable    1, 2

snooping and bridge domains    1

snooping interfaces    1

snooping overview    1

snooping proxies    1

static group membership    1

tracing operations    1

version    1, 2

IGMP snooping    

enabling    1

group limit    1

host-only interface    1

host-query message interval    1

last-member query interval    1

multicast-router interface    1

proxy    1

query response interval    1

robust count    1

source address    1

igmp statement    1

usage guidelines    1

igmp-snooping statement    1

IGMPv3    1

interoperability with older versions    1

ignore-stp-topology-change statement    1

usage guidelines    1

immediate-leave statement    

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

immediate-leave statement, IGMP snooping    

usage guidelines    1

import statement    

bootstrap    1

usage guidelines    1

DVMRP    1

usage guidelines    1

MSDP    1

usage guidelines    1

PIM    1

usage guidelines    1

import-target statement    1

usage guidelines    1

inclusive statement    1

inet statement    1

inet-mdt statement    

autodiscovery    1

inet-mvpn statement    

BGP    1

VRF advertisement    1

inet6-mvpn statement    

BGP    1

VRF advertisement    1

infinity statement    1

usage guidelines    1

ingress PE redundancy    

configuring    1

example    1

overview    1

init (tracing flag)    

PGM    1

interface lists    1

interface statement    

DVMRP    1

usage guidelines    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

multicast    1

multicast scoping    1

usage guidelines    1

PIM    1

usage guidelines    1

interface statement,    

IGMP snooping    

usage guidelines    1

interface-name statement    1

PIM    

usage guidelines    1

Internet Group Management Protocol     See IGMP    

interoperability    

PIM    1, 2

intra-as statement    1

IPsec    

with PIM-SM    1

IPv6    

embedded RP    

configuring    1

overview    1

J

join (tracing flag)    1

join-load-balance statement    1

usage guidelines    1

join-prune-timeout statement    1

K

keepalive (tracing flag)    

MSDP    1

key-chain statement    

BFD authentication    1

L

label-switched-path-template statement    1

usage guidelines    1

Layer 3 VPNs    1, 2, 3, 4, 5

leave (tracing flag)    

IGMP    1

MLD    1

listen statement    1

usage guidelines    1, 2

load balancing    1, 2

for PIM join    1

local statement    

PIM    1

usage guidelines    1

local-address statement    1, 2

MSDP    

usage guidelines    1

MSDP group    1

usage guidelines    1

MSDP peer    1

usage guidelines    1

PIM    1

usage guidelines    1

loose-check statement    

BFD authentication    1

M

manuals    

comments on    1

mapping-agent-election statement    1

usage guidelines    1

mappings    

SSM    1

maximum statement    

MSDP    1

usage guidelines    1

maximum-bandwidth statement    1

usage guidelines    1

maximum-rps statement    1

usage guidelines    1

maximum-transmit-rate statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

MBGP MVPNs    1, 2

configuration statements    1

configuring    1

routing instances, configuring    1

RPT-SPT mode    1

SPT-only mode    1

tracing traffic    1

MDT    1

configuring    1

data-mdt-reuse    1

group address    1

group range    1, 2

rate limit    1

source address    1

statements    1

threshold    1

threshold parameters    1

tunnel characteristics    1

tunnel limit    1, 2

mdt statement    1

usage guidelines    1

mesh groups    

MSDP    1

metric statement    

DVMRP    1

usage guidelines    1

metrics    

DVMRP    1, 2

minimum-interval statement    

PIM    1

usage guidelines    1

minimum-receive-interval statement    

PIM    1, 2

usage guidelines    1

MLD    

configuration statements    1

configuring PIM-to-MLD message translation    1

disabling    1

enabling    1

event recording    1

host-query message interval    1, 2

immediate-leave host removal    

configuring    1

last-member query interval    1, 2

overview    1

PIM-to-MLD message translation    1

query response interval    1, 2

robustness variable    1, 2

static group membership    1

tracing operations    1

mld    

enabling    1

mld statement    1

usage guidelines    1, 2

mode statement    

DVMRP    1

usage guidelines    1

MSDP    1

usage guidelines    1

PIM    1

usage guidelines    1, 2

MOSPF, defined    1

MSDP    

active source limit    1

maximum    1

per-source    1

threshold    1

authentication    1, 2

configuration statements    1, 2

configuring    1

data-encapsulation    1

default peer    1, 2, 3

disabling    1

enabling    1

groups    1, 2

local address    1

mode    1

peers    1

policy, routing    1, 2

remote source    1

routing tables    1

tracing operations    1

msdp statement    1

usage guidelines    1

mt (tracing flag)    1

mt interfaces    1, 2

mtrace (tracing flag)    

IGMP    1

MLD    1

multicast    

addresses    1

anycast RP    1

auto-RP    1

Bootstrap Router    1

configuration statements    1

configuring PIM-to-IGMP message translation    1

configuring PIM-to-MLD message translation    1

defined    1

forwarding cache limits    1

ingress PE redundancy    1

Layer 2 frames    1, 2

Layer 3 VPNs    1, 2, 3, 4

leaf and branch    1

packet replication    1

PIM-to-IGMP and PIM-to-MLD message translation    1

protocols    1

group membership    1

routing options    

configuration statements    1

routing protocols    1

compared, table    1

scoping    1, 2, 3

snooping    1, 2

snooping and flood groups    1

snooping and forwarding cache    1

snooping and graceful restart    1

snooping configuration statements    1

snooping overview    1

SSM groups    1

SSM mapping    1

standards supported    1, 2

terminology    1

tunnel interfaces    1, 2

uses    1

multicast distribution trees     See MDT    

multicast filters    1

MAC filters    1

MSDP SA messages    1

RP/DR register messages    1

configuring    1

multicast interfaces    1

Multicast Listener Discovery     See MLD    

Multicast Open Shortest Path First     See MOSPF    

Multicast Source Discovery Protocol     See MSDP    

multicast statement    1

usage guidelines    1, 2, 3, 4, 5

multicast VPN extranets    

applications    1

configuration guidelines    1

configuring    1

overview    1

multicast VPNs    

inclusive point-to-multipoint LSPs    1

multicast group address    1

point-to-multipoint LSPs    1

routing instance configuration    1

multicast-router-interface statement    1

multicast-router-interface statement, IGMP snooping    

IGMP snooping    

usage guidelines    1

multicast-snooping-options statement    1

multichassis-lag-replicate-state statement    1

usage guidelines    1

multiplier statement    

PIM    1, 2

usage guidelines    1

mvpn statement    1, 2, 3

usage guidelines    1

mvpn-mode statement    1

N

neighbor (tracing flag)    1

neighbor-policy statement    1

usage guidelines    1

neighbors    

MSDP    1

nexthop-hold-time statement    1

NLRI parameters    

configuring for MBGP MVPNs    1

no-accounting statement    

IGMP    1

MLD    1

no-multicast-echo statement    

PIM    

usage guidelines    1

no-qos-adjust statement    1

nonstop active routing    

role in PIM    1

role of IGMP    1

notice icons defined    1

nsr-synchronization (tracing flag)    1

O

oif-map statement    

IGMP    1

MLD (interface)    1

output-forwarding-class-map statement    

usage guidelines    1

override-interval    

PIM    1

override-interval statement    

usage guidelines    1

P

packets (tracing flag)    

DVMRP    1

IGMP    1

MLD    1

PGM    1

PIM    1

parentheses, in syntax descriptions    1

parser (tracing flag)    

PGM    1

passive statement    

IGMP    1

MLD (interface)    1

pd multicast interface    1

pe multicast interface    1

peer statement    

MSDP    1

usage guidelines    1

PGM    

architecture    1

configuration statements    1

configuring    1

overview    1

routers    1

tracing operations    1

pgm statement    1

usage guidelines    1

PIM    

and nonstop active routing    1

anycast RP    1, 2

assert timeout    1, 2

configuring    1

background    1

BFD    1, 2, 3, 4, 5, 6

bootstrap messages import and export    1, 2

bootstrap router    1, 2, 3

configuration statements    1, 2

configuring    1

configuring PIM messages to IGMP messages    1

configuring PIM messages to MLD messages    1

dense mode    1, 2, 3

defined    1

designated router    1

embedded RP    1

configuring    1

overview    1

enabling    1

filters     See multicast filters    

graceful restart    

disabling    1

sparse mode    1

sparse-dense mode    1

hello interval    1

hold-time period    1, 2

incoming join filter policy, applying    1

interfaces    

pd    1

pe    1

pimd    1

pime    1

interoperability    1, 2

join load balancing    

configuring    1

join suppression    

configuring    1

join-prune-timeout    1

Layer 3 VPNs    1

maximum RPs    1

mixing modes    1

modes    1

network components    1

outgoing join filter policy, applying    1

overview    1

policy, routing    1

rendezvous point tree    1

restart-duration statement    1

usage guidelines    1

routing tables    1

RPs    1, 2, 3, 4, 5

anycast    1

anycast RP    1

embedded    1

mapping options    1

maximum    1

source registration    1

SPT cutover    1

SPT cutover control    1

sparse mode    1, 2, 3

defined    1

with IPsec    1

sparse-dense mode    1, 2, 3

defined    1

SSM    1, 2, 3

translating PIM messages to IGMP and MLD messages    1

version    1, 2, 3

PIM provider tunnels    

configuring for MBGP MVPNs    1

pim statement    1

usage guidelines    1

pim-asm statement    1

PIM-RP    

SPT    

configuring threshold cutover policy    1

PIM-SSM    

group range    1

limiting VRF route advertisements    1

selective tunnels    1

pim-ssm statement    1

selective tunnel    1

pim-to-igmp-proxy statement    1

pim-to-mld-proxy statement    1

pimd multicast interface    1

pime multicast interface    1

point-to-multipoint LSPs    

for multicast VPNs    

selective tunnels    1

multicast VPNs    1

inclusive tunnels    1

policy statement    

flow map    1

SSM map    1

policy, import    

BSR    1

policy, routing    

DVMRP    1, 2, 3

MSDP    1, 2, 3

PIM    1

PIM join filter    1, 2

Pragmatic General Multicast     See PGM    

prefix statement    1

usage guidelines    1

priority statement    

bootstrap    1

PIM    1

usage guidelines    1

usage guidelines    1

probe (tracing flag)    1

promiscuous-mode statement    

IGMP    1

usage guidelines    1

propagation-delay statement    1

usage guidelines    1

Protocol Independent Multicast     See PIM    

protocols    

group membership    1

multicast    1

multicast routing    1

compared, table    1

provider tunnel    

group address    1

provider-tunnel statement    1

usage guidelines    1

proxy statement    

IGMP snooping    1

proxy statement, IGMP snooping    

usage guidelines    1

prune (tracing flag)    

DVMRP    1

PIM    1

Q

query-interval statement    

AMT    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

query-interval statement, IGMP snooping    

usage guidelines    1

query-last-member-interval statement    

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

query-last-member-interval statement, IGMP snooping    

usage guidelines    1

query-response-interval statement    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

query-response-interval statement, IGMP snooping    

usage guidelines    1

R

rate statement    

MDT    1

usage guidelines    1

redundant-sources statement    1

register (tracing flag)    1

relay statement    1, 2

rendezvous point     See PIM    

rendezvous point tree     See See RPT    

rendezvous-point tree     See RPT    

rendezvous-point trees    1, 2, 3

replication    

multicast packet    1

report (tracing flag)    

DVMRP    1

IGMP    1

MLD    1

reset-tracking-bit statement    1

usage guidelines    1

restart-duration statement    1

PIM graceful restart    

usage guidelines    1

reverse path forwarding     See RPF    

reverse-oif-mapping statement    1

usage guidelines    1

rib-group statement    

DVMRP    1

usage guidelines    1

MSDP    1

usage guidelines    1

PIM    1

usage guidelines    1

usage guidelines    1

robust-count statement    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

robust-count statement, IGMP snooping    

usage guidelines    1

route (tracing flag)    

MSDP    1

route-socket (tracing flag)    

PGM    1

route-target statement    1

usage guidelines    1

routing instances    

configuring VRF route targets for    1

for MBGP MVPNs    1

routing options    

multicast    

configuration statements    1

routing tables    

DVMRP    1, 2

MSDP    1

PIM    1

RP    

anycast    1

embedded    1

rp (tracing flag)    1

rp statement    1

rp-register-policy statement    1

usage guidelines    1

rp-set statement    1

usage guidelines    1, 2

RPF    1

checks    1

policies    1

table    1

populating    1

RPF check, multicast    

RPF policy    1

rpf-check-policy statement    1

usage guidelines    1

RPs    

maximum    1

RPT    1

RPT-SPT mode    

configuring    1

for MBGP MVPNs    1

rpt-spt statement    1

rsvp-te statement    1

usage guidelines    1, 2

S

S-PMSI autodiscovery routes    1

SAP    

configuration statements    1

configuring    1, 2

overview    1

sap statement    1

usage guidelines    1, 2

scope statement    1

usage guidelines    1

scope-policy statement    1

usage guidelines    1

scoping, multicast    1

with scope policy    1

SDP    1

secret-key-timeout statement    1

selective provider tunnels    

wildcard source    1

wildcards for    1

selective statement    1

usage guidelines    1

Session Announcement Protocol     See SAP    

Session Description Protocol     See SDP    

shared trees    1

shared-tree data distribution     See RPT-SPT mode    

shortest path tree only mode     See SPT-only mode    

shortest-path tree     See SPT    

shortest-path trees    1, 2, 3

show (tracing flag)    

PGM    1

signaling statement    1

single forwarder election    

configuring    1

snooping     See multicast overview    

configuration statements    1

flood groups and    1

forwarding cache and    1

graceful restart and    1

IGMP and VLANs    1

IGMP interfaces    1

IGMP overview    1

IGMP proxies    1

IGMP tracing operations    1

multicast    1, 2

spanning tree interfaces state changes    1

source filtering    1

source statement    1

IGMP    1

usage guidelines    1

IGMP snooping    1

MDT    1

usage guidelines    1

MLD    1

usage guidelines    1

MSDP    1

SSM    1

usage guidelines    1, 2

usage guidelines    1

source-active (tracing flag)    1

source-active-request (tracing flag)    1

source-active-response (tracing flag)    1

source-address statement    

IGMP snooping    1

source-address statement, IGMP snooping    

usage guidelines    1

source-count statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

source-increment statement    

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

source-specific multicast     See SSM    

SPT    1

configuring threshold cutover policy    1

cutover control    1, 2

SPT-only    1

SPT-only mode for MBGP MVPNs, configuring    1

spt-only statement    1

spt-threshold statement    1

usage guidelines    1

SSM    1, 2

configuring    1

domains    1

mapping    1

ssm-groups statement    1

usage guidelines    1

ssm-map statement    

AMT    1

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

SSM    1

usage guidelines    1

state (tracing flag)    

PGM    1

static statement    

IGMP    1

usage guidelines    1

IGMP snooping    1

MLD    1

usage guidelines    1

PIM    1

usage guidelines    1

static statement, IGMP snooping    

IGMP snooping    

usage guidelines    1

static-lsp statement    1

usage guidelines    1, 2

subscriber-leave-timer statement    1

usage guidelines    1

support, technical     See technical support    

syntax conventions    1

T

target statement    1

technical support    

contacting JTAC    1

threshold    

MDT    1

threshold statement    

forwarding cache    1

usage guidelines    1, 2

MDT    1

usage guidelines    1

MSDP    1

usage guidelines    1

multicast snooping    1

threshold-rate statement    1

timeout statement    

flow map    1

forwarding cache    1

traceoptions statement    1

DVMRP    1

usage guidelines    1

for multicast VPNs    1

IGMP    1

usage guidelines    1

IGMP snooping    1

usage guidelines    1

MLD    1

usage guidelines    1

MSDP    1

usage guidelines    1

multicast snooping    1

PGM    1

usage guidelines    1

PIM    1

usage guidelines    1

tracing flags    

all    

PGM    1

assert    1

bootstrap    1

cache, PIM    1

graft    

DVMRP    1

PIM    1

hello    

PIM    1

init    

PGM    1

join    1

keepalive    

MSDP    1

leave    

IGMP    1

MLD    1

MLD    

leave    1

mt    1

mtrace    

IGMP    1

MLD    1

neighbor    1

nsr-synchronization    1

packets    

DVMRP    1

IGMP    1

MLD    1

PGM    1

PIM    1

parser, PGM    1

probe    1

prune    

DVMRP    1

PIM    1

register    1

report    

DVMRP    1

IGMP    1

MLD    1

route    

MSDP    1

route-socket    

PGM    1

rp    1

show    

PGM    1

source-active    1

source-active-request    1

source-active-response    1

state    

PGM    1

tracing operations    

DVMRP    1, 2

IGMP    1, 2

IGMP snooping    1

MLD    1, 2

MSDP    1, 2

PGM    1

PIM    1

tracing traffic    

MBGP MVPNs    1

tunnel limit    

MDT    1

Tunnel Services PIC    1

tunnel-devices statement    1

tunnel-limit statement    1, 2, 3

usage guidelines    1, 2

U

unicast statement    1

unicast-umh-election statement    1

upstream multicast hop    

configuring    1

upstream-interface statement    1

V

version statement    

AMT    1

BFD    1

IGMP    1

usage guidelines    1

MLD    1

usage guidelines    1

PIM    1

usage guidelines    1, 2, 3, 4

virtual-router statement    

usage guidelines    1

vlan statement    

IGMP snooping    1

vlan statement, IGMP snooping    

usage guidelines    1

VLANs    

IGMP snooping    1

VPN control plane    1

VPN tunnel source    1

vpn-group-address statement    1

vpn-tunnel-source statement    

usage guidelines    1

VRF    

route targets for MBGP MVPN routing instances    1

vrf-advertise-selective statement    1

W

wildcard-group-inet statement    1

wildcard-group-inet6 statement    1

wildcard-source statement    1

wildcards    

for selective provider tunnels    1, 2

A

accept-remote-source statement    1

accounting statement    

AMT interface    1

IGMP    1

IGMP interface    1

MLD    1

MLD interface    1

active-source-limit statement    1

address statement    

anycast RPs    1

local RPs    1

static RPs    1

amt statement    

IGMP    1

protocol    1

anycast-pim statement    1

anycast-prefix statement    1

asm-override-ssm statement    1

assert-timeout statement    1

authentication-key statement    

MSDP    1

auto-rp statement    1

autodiscovery statement    1

autodiscovery-only statement    1

B

backup-pe-group statement    1

backups statement    1

bandwidth statement    1

bfd-liveness-detection statement    

PIM    1

bootstrap statement    1

bootstrap-export statement    1

bootstrap-import statement    1

bootstrap-priority statement    1

D

data-encapsulation statement    1

data-mdt-reuse statement    

PIM    1

default-peer statement    1

default-vpn-source statement    1

defaults statement    

AMT    1

dense-groups statement    1

disable statement    

DVMRP    1

IGMP    1

MLD    1

MSDP    1

PIM family    1

PIM graceful restart    1

PIM interfaces    1

PIM protocol    1

SAP and SDP    1

dr-election-on-p2p statement    1

dr-register-policy statement    1

dvmrp statement    1

E

embedded-rp statement    1

exclude statement    

IGMP    1

MLD    1

export statement    

DVMRP    1

MSDP    1

PIM    1, 2

export-target statement    1

F

family statement    1

bootstrap    1

local RP    1

VRF advertisement    1

flood-groups statement    

multicast snooping    1

flow-map statement    1

forwarding-cache statement    

multicast snooping    1

G

graceful-restart statement    

multicast snooping    1

PIM    1

group statement    1

IGMP    1

IGMP snooping    1

MDT    1

MLD    1

MSDP    1

group-address statement    1

group-count statement    

IGMP    1

MLD    1

group-increment statement    

IGMP    1

MLD    1

group-limit statement    

IGMP snooping    1

group-policy statement    

AMT    1

IGMP    1

MLD    1

group-range statement    1, 2

group-ranges statement    1

H

hello-interval statement    

PIM    1

hold-time statement    

DVMRP    1

PIM    1

host-only-interface statement    1

I

igmp statement    1

igmp-snooping statement    1

ignore-stp-topology-change statement    1

immediate-leave statement    

IGMP    1

IGMP snooping    1

MLD    1

import statement    

bootstrap    1

DVMRP    1

MSDP    1

PIM    1

import-target statement    1

inclusive statement    1

inet statement    1

inet-mdt statement    

autodiscovery    1

inet-mvpn statement    

BGP    1

VRF advertisement    1

inet6-mvpn statement    

BGP    1

VRF advertisement    1

infinity statement    1

interface statement    

DVMRP    1

IGMP    1

IGMP snooping    1

MLD    1

multicast    1

multicast scoping    1

PIM    1

interface-name statement    1

intra-as statement    1

J

join-load-balance statement    1

join-prune-timeout statement    1

L

label-switched-path-template statement    1

listen statement    1

local statement    

PIM    1

local-address statement    1, 2

MSDP group    1

MSDP peer    1

PIM    1

M

mapping-agent-election statement    1

maximum statement    

MSDP    1

maximum-bandwidth statement    1

maximum-rps statement    1

maximum-transmit-rate statement    

IGMP    1

MLD    1

mdt statement    1

metric statement    

DVMRP    1

minimum-interval statement    

PIM    1

minimum-receive-interval statement    

PIM    1, 2

mld statement    1

mode statement    

DVMRP    1

MSDP    1

PIM    1

msdp statement    1

multicast statement    1

multicast-router-interface statement    1

multicast-snooping-options statement    1

multichassis-lag-replicate-state statement    1

multiplier statement    

PIM    1, 2

mvpn statement    1, 2, 3

mvpn-mode statement    1

N

neighbor-policy statement    1

nexthop-hold-time statement    1

no-accounting statement    

IGMP    1

MLD    1

no-qos-adjust statement    1

O

oif-map statement    

IGMP    1

MLD (interface)    1

override-interval    

PIM    1

P

passive statement    

IGMP    1

MLD (interface)    1

peer statement    

MSDP    1

pgm statement    1

pim statement    1

pim-asm statement    1

pim-ssm statement    1

selective tunnel    1

pim-to-igmp-proxy statement    1

pim-to-mld-proxy statement    1

prefix statement    1

priority statement    

bootstrap    1

PIM    1

promiscuous-mode statement    

IGMP    1

propagation-delay statement    1

provider-tunnel statement    1

proxy statement    

IGMP snooping    1

Q

query-interval statement    

AMT    1

IGMP    1

IGMP snooping    1

MLD    1

query-last-member-interval statement    

IGMP    1

IGMP snooping    1

MLD    1

query-response-interval statement    1

IGMP    1

IGMP snooping    1

MLD    1

R

rate statement    

MDT    1

redundant-sources statement    1

relay statement    1, 2

reset-tracking-bit statement    1

restart-duration statement    1

reverse-oif-mapping statement    1

rib-group statement    

DVMRP    1

MSDP    1

PIM    1

robust-count statement    1

IGMP    1

IGMP snooping    1

MLD    1

route-target statement    1

rp statement    1

rp-register-policy statement    1

rp-set statement    1

rpf-check-policy statement    1

rpt-spt statement    1

rsvp-te statement    1

S

sap statement    1

scope statement    1

scope-policy statement    1

secret-key-timeout statement    1

selective statement    1

signaling statement    1

source statement    1

IGMP    1

IGMP snooping    1

MDT    1

MLD    1

MSDP    1

SSM    1

source-address statement    

IGMP snooping    1

source-count statement    

IGMP    1

MLD    1

source-increment statement    

IGMP    1

MLD    1

spt-only statement    1

spt-threshold statement    1

ssm-groups statement    1

ssm-map statement    

AMT    1

IGMP    1

MLD    1

SSM    1

static statement    

IGMP    1

IGMP snooping    1

MLD    1

PIM    1

static-lsp statement    1

subscriber-leave-timer statement    1

T

target statement    1

threshold statement    

forwarding cache    1

MDT    1

MSDP    1

multicast snooping    1

threshold-rate statement    1

timeout statement    

flow map    1

forwarding cache    1

traceoptions statement    1

DVMRP    1

for multicast VPNs    1

IGMP    1

IGMP snooping    1

MLD    1

MSDP    1

multicast snooping    1

PGM    1

PIM    1

tunnel-devices statement    1

tunnel-limit statement    1, 2, 3

U

unicast statement    1

unicast-umh-election statement    1

upstream-interface statement    1

V

version statement    

AMT    1

BFD    1

IGMP    1

MLD    1

PIM    1

vlan statement    

IGMP snooping    1

vpn-group-address statement    1

vrf-advertise-selective statement    1

W

wildcard-group-inet statement    1

wildcard-group-inet6 statement    1

wildcard-source statement    1