Index
Symbols
A
- across-the-network applications 1
- action statement 1
- usage guidelines 1
- address statement 1
- usage guidelines 1
- aggregated Ethernet interfaces
- aggregated interfaces
- scheduler modes 1
- aggregated SONET/SDH interfaces
- aliases, forwarding-class 1
- application-profile statement 1
- usage guidelines 1
- application-sets statement
- applications statement
- architecture
- tricolor marking 1
- AS PIC
- ATM interfaces
- atm-options statement 1
- atm-scheduler-map statement 1
- usage guidelines 1
- ATM2 IQ interfaces
B
C
- cbr statement 1
- usage guidelines 1
- channelized IQ interfaces
- CIR 1
- configuring with PIR 1
- class statement 1
- class-of-service statement 1
- usage guidelines 1
- classification
- classification-override statement 1
- usage guidelines 1
- classifiers
- default for VPLS 1
- classifiers statement 1
- code-point aliases 1, 2, 3
- code-point statement 1
- usage guidelines 1
- code-point-aliases statement 1
- usage guidelines 1
- code-points statement 1
- usage guidelines 1
- color-aware
- color-blind
- comments, in configuration statements 1
- components
- CoS 1
- conventions
- text and syntax 1
- copy-tos-to-outer-ip-header statement 1
- usage guidelines 1
- CoS
- 10-port 10-Gigabit Oversubscribed Ethernet PICs 1
- action statements 1
- additional examples 1
- aggregated Ethernet interfaces 1
- aggregated Ethernet interfaces example 1
- aggregated SONET/SDH interfaces 1
- aggregated SONET/SDH interfaces example 1
- applications 1
- applications of 1
- applying traffic control profile examples 1
- AS PIC 1, 2
- ATM and VPLS 1
- ATM interfaces
- egress queues 1
- ATM2 IQ interfaces 1, 2
- ATM2 IQ interfaces example 1
- buffer size 1
- changing protocol queue assignments 1
- channelized IQ interfaces 1
- CIR mode 1
- components 1
- default protocol queue assignments 1
- default scheduler 1
- default settings 1
- drop profile 1, 2, 3, 4
- drop profile examples 1
- eight forwarding classes 1
- example configuration 1
- Enhanced IQ interfaces 1, 2, 3, 4, 5
- Enhanced Queuing DPC hardware 1
- EQ DPC interfaces 1
- example classifiers configuration 1
- example interfaces configuration 1
- example IPv6 configuration 1
- example policy configuration 1
- example rewrite configuration 1
- example schedulers configuration 1
- for aggregated interfaces 1
- for aggregated interfaces example 1
- for IEEE 802.1ad 1
- for IPsec tunnels 1, 2
- for IQ2 PICs hierarchical schedulers 1
- for MPLS 1, 2
- for Multiservices PIC tunnels 1, 2
- for tunnels 1, 2, 3
- GRE ToS bits 1
- forwarding, next-hop selection 1
- defining and applying the policy 1
- forwarding-class aliases 1
- Gigabit Ethernet IQ interfaces 1
- hardware capabilities and limitations 1
- hierarchical scheduler interface set 1, 2, 3
- hierarchical scheduler introduction 1
- hierarchical scheduler terms 1
- hierarchy examples 1
- ingress CoS on Enhanced Queuing DPC 1
- inputs and outputs examples 1
- inputs and outputs overview 1
- interface examples 1
- interface set examples 1
- interfaces
- sample configuration 1
- interfaces without support 1
- internal scheduler nodes 1
- IQ2 interfaces 1
- IQ2 PICs 1
- IQ2E interfaces 1
- IQ2E PICs 1
- IQE default rates 1
- IQE excess bandwidth 1
- IQE interfaces 1, 2
- IQE modes 1
- IQE terminology 1
- IQE traffic 1, 2
- J Series router packet flow 1
- limitations for aggregated interfaces 1
- low latency static policer 1
- M Series router packet flow 1
- match conditions 1
- MDRR on Enhanced Queuing DPC 1
- multifield classifier 1
- Multiservices PIC 1, 2
- MX Series router packet flow 1
- MX Series router packet flow example 1
- network packet flow 1
- on Enhanced Queuing DPC 1
- on M320 router and FPCs 1
- on MX Series routers 1
- output shaping
- overriding input classification 1
- overview 1
- packet flow within routers 1
- per-priority shaping on Trio MPC/MIC interfaces 1
- PIR-only mode 1
- priority propagation 1
- process packet flow 1
- process packet flow example 1
- rate limit 1, 2
- RED 1, 2
- rewrite rules 1, 2
- rules 1
- scheduler examples 1
- scheduler map examples 1
- scheduler priority 1
- configuration example 1
- scheduling 1
- associating with an interface 1
- associating with DLCI or VLAN 1, 2
- associating with fabric priority 1, 2
- associating with physical interface 1
- buffer size 1, 2, 3, 4
- chassis 1
- configuration example 1
- configuring a map 1
- default settings 1
- drop profile 1
- maximum delay per queue 1
- output interface 1, 2
- packet forwarding component 1, 2, 3
- priority 1, 2
- strict-high priority 1
- transmission rate 1
- simple filter on Enhanced Queuing DPC 1
- simple filter rules 1
- T Series router packet flow 1
- traffic control profile examples 1
- transmission rate 1
- Trio DPC and MPC/MIC interfaces 1
- Trio DPC and MPC/MIC interfaces overview 1
- unclassified traffic 1
- WRED on Enhanced Queuing DPC 1
- CoS features
- PICs compared 1
- CoS forwarding
- CoS queues
- packet forwarding component 1
- CoS rules
- example 1
- CoS scheduling
- CoS services PICs
- output packet rewriting 1
- CoS values 1, 2
- CoS-based forwarding 1, See CoS forwarding
- curly braces, in configuration statements 1
- customer support 1
- contacting JTAC 1
D
- data statement 1
- usage guidelines 1
- default
- drop profiles 1
- default setting
- CoS 1
- defaults
- priority queuing 1
- delay buffer 1
- delay-buffer-rate statement 1
- destination address classification 1
- destination statement 1
- destination-address statement
- DiffServ 1, 2, 3, 4
- discard statement 1
- usage guidelines 1
- DLCIs
- excess bandwidth 1
- documentation
- comments on 1
- DPCs
- drop profiles
- drop-probability statement 1, 2, See also RED
- usage guidelines 1
- drop-profile statement 1
- drop-profile-map statement 1
- drop-profiles statement 1
- usage guidelines 1
- drop-timeout by forwarding class
- example configuration 1
- drop-timeout statement 1
- usage guidelines 1
- DSCP 1, 2, 3
- dscp statement 1
- dscp-code-point statement 1
- dscp-ipv6 statement 1
E
- egress-shaping-overhead statement 1
- eight forwarding classes 1
- example configuration 1
- Enhanced IQ interfaces
- Enhanced IQ PICs
- epd-threshold statement 1
- usage guidelines 1
- EQ DPCs
- rate limit 1
- Ethernet IQ2 PIC
- schedulers 1
- Ethernet IQ2 PICs
- RTT delay buffer values 1
- example
- CoS classifiers configuration 1
- CoS configuration 1
- CoS inputs and outputs 1
- CoS IPv6 configuration 1
- CoS on aggregated interfaces 1
- CoS per-priority shaping on Trio MPC/MIC interfaces 1
- CoS policy configuration 1
- CoS rewrite configuration 1
- CoS schedulers configuration 1
- drop profiles 1
- multifield classifier for destination address 1
- policers and shaping rate changes 1
- weighted RED 1
- excess bandwidth
- MS-PIC 1
- Excess bandwidth
- DLCIs 1
- excess bandwidth distribution
- Trio DPC and MPC/MIC interfaces 1
- excess-bandwidth statement
- configuration guidelines 1
- excess-bandwidth-share statement 1
- usage guidelines 1
- excess-priority statement 1
- usage guidelines 1
- excess-rate statement 1
- usage guidelines 1
- EXP bits 1, 2, 3
- rewriting 1
- exp statement 1
- exp-push-push-push statement 1
- usage guidelines 1
- exp-swap-push-push statement 1
- usage guidelines 1
- explicit-null statement
- with MPLS EXP classifiers 1
F
- fabric priority queuing 1
- overriding 1
- fabric statement 1
- usage guidelines 1
- family statement
- fill-level statement 1
- usage guidelines 1
- filter statement 1
- usage guidelines 1
- firewall statement 1
- fixed classification 1
- font conventions 1
- forwarding class
- for routing engine traffic 1
- forwarding classes 1
- forwarding policy options 1
- CoS-based forwarding 1
- forwarding, next-hop selection 1
- overriding the input classification 1
- forwarding-class aliases 1
- forwarding-class statement 1
- forwarding-classes statement 1
- forwarding-classes-interface-specific statement 1
- usage guidelines 1
- forwarding-policy statement 1
- usage guidelines 1
- four loss priorities 1, 2
- fragment-threshold statement 1
- usage guidelines 1
- fragmentation
- fragmentation-map statement 1
- usage guidelines 1
- fragmentation-maps statement 1
- usage guidelines 1
- from statement
- ftp statement 1
- usage guidelines 1
G
H
I
- icons defined, notice 1
- IEEE 802.1ad
- CoS classification of traffic 1
- ieee-802.1 statement 1
- usage guidelines 1
- ieee-802.1ad statement 1
- if-exceeding statement 1
- import statement 1
- usage guidelines 1
- in-the-box applications 1
- inet-precedence statement 1
- ingress CoS
- on Enhanced Queuing DPC 1
- ingress-shaping-overhead statement 1
- usage guidelines 1
- input-excess-bandwidth-share statement 1
- usage guidelines 1
- input-policer statement 1
- input-scheduler-map statement 1
- usage guidelines 1
- input-shaping-rate statement 1
- usage guidelines 1
- input-three-color statement 1
- input-traffic-control-profile statement 1
- input-traffic-control-profile-remaining statement 1
- usage guidelines 1
- intelligent oversubscription
- Trio DPC and MPC/MIC interfaces 1
- interface-set statement 1
- interfaces
- interfaces statement
- internal-node statement 1
- usage guidelines 1
- interpolate statement 1
- usage guidelines 1
- introduction
- hierarchical schedulers 1
- IPsec
- IPv4 or IPv6 packets
- overriding input classification 1
- Ipv6
- CoS configuration example 1
- IQ2 interfaces
- shared resources example 1
- IQ2 PICs
- IQ2E PICs
- rate limit 1
- IQE PIC
- IQE PICs
- IRB statement
- usage guidelines 1
- irb statement
- CoS 1
L
- Layer 2 policer
- Layer 3 VPN
- multifield classification 1
- layer2-policer statement 1
- usage guidelines 1
- limitations
- tricolor marking 1
- linear-red-profile statement 1
- usage guidelines 1
- linear-red-profiles statement 1
- usage guidelines 1
- link services interfaces 1
- CoS components 1
- logical bandwidth policer
- example 1
- logical-bandwidth-policer statement 1
- usage guidelines 1
- logical-interface-policer statement 1
- usage guidelines 1
- loss-priority statement 1
- usage guidelines 1
- low-plp-max-threshold statement 1
- usage guidelines 1
- low-plp-threshold statement 1
- usage guidelines 1
- lsp-next-hop statement 1
- usage guidelines 1
- LSPs
M
- M320 router
- FPCs and CoS 1
- manuals
- comments on 1
- match-direction statement
- max-queues-per-interface statement 1
- usage guidelines 1
- maximum delay per queue 1
- MDRR
- on Enhanced Queuing DPC 1
- member-link-scheduler
- usage guidelines 1
- member-link-scheduler statement 1
- mode statement 1
- usage guidelines 1
- MPLS
- MPLS EXP classifiers
- MS-PIC
- multifield classifier
- multilink-class statement 1
- usage guidelines 1
- Multiservices PIC
- Multiservices PICs
- MX Series routers
N
O
- one-rate four-color marking 1, 2
- output-forwarding-class-map statement 1
- usage guidelines 1
- output-policer statement 1
- output-three-color statement 1
- output-traffic-control-profile statement 1
- output-traffic-control-profile-remaining statement 1
- usage guidelines 1
- overhead-accounting statement 1
- oversubscription 1, 2
- overview
P
- packet flow
- packet flow example
- CoS process 1
- packet forwarding component
- CoS queues 1
- packet header bits
- rewritten 1
- packet loss priority
- overview 1
- parentheses, in syntax descriptions 1
- per-priority scheduling
- Trio MPC/MIC interfaces 1
- per-session-scheduler statement 1
- per-unit scheduling 1
- on channelized IQ interfaces 1
- per-unit scheduling for GRE tunnels using IQ2 and IQ2E PICs 1
- per-unit-scheduler statement 1
- usage guidelines 1
- PICs
- PIR 1
- configuring with CIR 1
- platform support
- PLP See see packet loss priority
- plp-copy-all 1
- plp-to-clp statement 1
- usage guidelines 1
- plp1 statement
- usage guidelines 1
- policer
- policer statement
- firewall 1
- policers
- priority
- CoS propagation 1
- priority queuing
- priority statement 1
- priority, CoS
- configuration example 1
- protocol statement 1
- usage guidelines 1
- protocols
Q
R
- random early detection mechanism See RED
- rate limit
- RED
- RED buffer occupancy weight
- configuring 1
- RED, weighted
- example 1
- red-buffer-occupancy statement 1
- usage guidelines 1
- reflexive statement 1
- reflexive | reverse statement
- usage guidelines 1
- replicate
- scheduler mode 1
- restricted-queues statement 1
- usage guidelines 1
- reverse statement 1
- usage guidelines 1
- rewrite rules 1
- rewrite-rules statement 1
- usage guidelines 1
- rewriting
- RFC 2698 1, 2
- routing engine traffic
- routing instances
- routing-instance statement
- usage guidelines 1
- routing-instances statement 1
- usage guidelines 1
- rtvbr statement 1
- usage guidelines 1
- rule statement
- rule-set statement
S
- scale
- scheduler mode 1
- scheduler
- shared input 1
- scheduler maps
- applying to physical interfaces 1
- scheduler modes
- scheduler node scaling
- Trio MPC/MIC interfaces 1
- scheduler statement 1
- usage guidelines 1
- scheduler-map statement 1
- scheduler-map-chassis statement 1
- usage guidelines 1
- scheduler-maps statement
- schedulers
- applying traffic control profile examples 1
- drop profile examples 1
- Ethernet IQ2 PIC 1
- hierarchical 1
- hierarchical examples 1
- hierarchical introduction 1
- hierarchical terms 1
- hierarchy examples 1
- interface
- configuration example 1
- interface examples 1
- interface set application 1
- interface set caveats 1
- interface set configuration 1
- interface set examples 1
- internal nodes 1
- PICs compared 1, 2
- PIR-only and CIR mode 1
- priority propagation 1
- scheduler map examples 1
- traffic control profile examples 1
- unclassified traffic and 1
- schedulers statement 1
- scheduling 1
- associating with an interface 1
- associating with DLCI or VLAN 1
- example configuration 1
- associating with fabric priority 1
- example configuration 1
- associating with physical interface 1
- buffer size 1
- configuration example 1
- configuring a map 1
- default settings 1
- drop profile 1
- maximum delay per queue 1
- packet forwarding component 1
- priority
- priority queuing 1
- strict-high priority 1
- transmission rate 1
- services
- services statement
- shaping
- shaping rate
- shaping statement 1
- usage guidelines 1
- shaping-rate statement 1
- shaping-rate-excess-high statement 1
- usage guidelines 1
- shaping-rate-excess-low statement 1
- usage guidelines 1
- shaping-rate-priority-high statement 1
- usage guidelines 1
- shaping-rate-priority-low statement 1
- usage guidelines 1
- shaping-rate-priority-medium statement 1
- usage guidelines 1
- shared resources
- IQ2 interfaces example 1
- shared scheduling 1
- shared-instance statement 1
- shared-scheduler statement 1
- usage guidelines 1
- signaled LSPs
- simple filter
- simple-filter statement
- sip statement 1
- usage guidelines 1
- source-address statement
- stateful firewall
- strict-high priority, explained 1
- support, technical See technical support
- syntax conventions 1
- syslog statement
T
- technical support
- contacting JTAC 1
- term statement
- then statement
- three-color-policer statement 1
- usage guidelines 1
- ToS translation
- Multiservices PICs 1
- traffic-control-profiles statement 1
- traffic-manager statement 1
- translation-table statement 1
- usage guidelines 1
- transmission rate, CoS 1
- transmit rate limiting
- MS-PIC 1
- transmit-rate statement 1
- usage guidelines 1
- transmit-weight statement 1
- usage guidelines 1
- tri-color statement 1
- usage guidelines 1
- tricolor marking
- tricolor marking policer 1, 2
- Trio DPC and MPC/MIC interfaces
- Trio MPC/MIC interfaces
- tunnel interfaces
- CoS for 1
- tunnels
- two-rate tricolor marking 1, 2
U
V
- vbr statement 1
- usage guidelines 1
- VC tunnel CoS
- vc-cos-mode statement 1
- usage guidelines 1
- vci statement 1
- usage guidelines 1
- video statement 1
- usage guidelines 1
- VLAN shaping on aggregated interfaces
- Trio DPC and MPC/MIC interfaces 1
- VLAN tag
- BA classifiers 1
- VLAN tags
- vlan-tag statement 1
- voice statement 1
- usage guidelines 1
- VoIP traffic classification 1
- VPLS
W
Hide Navigation Pane
Show Navigation Pane
Download
SHA1