Technical Documentation

Chassis-Level Features, Junos OS Release 10.3

The Junos OS enables you to configure chassis-level features that are either platform-specific or PIC-specific. In addition, you can configure support for aggregated devices, chassis-level alarms, external clock synchronization, and other features at the [edit chassis] hierarchy level of the CLI.

This page contains information about router chassis configuration described in the JUNOS® OS System Basics Configuration Guide.

Configuring TX Matrix Chassis-Level Features

Using the Junos OS to Configure a T640 Router Within a Routing Matrix

Configuring the Junos OS to Upgrade and Downgrade Switch Interface Boards on a TX Matrix Router

Configuring the Junos OS to Enable the TX Matrix Router to Generate an Alarm If a T640 Router Stays Offline

Configuring TX Matrix Plus Chassis-Level Features

Using the Junos OS to Configure a T1600 Router Within a Routing Matrix

Configuring the Junos OS to Enable the TX Matrix Plus Router to Generate an Alarm If a T1600 Router Stays Offline

Configuring the Junos OS to Upgrade the T1600 Router Chassis to LCC0 of a TX Matrix Plus Routing Platform

Configuring M Series Chassis-Level Features

Configuring Port-Mirroring Instances on M320 Routers

Configuring Port-Mirroring Instances on M120 Routers

Configuring the Junos OS to Enable MTU Path Check for a Routing Instance on M Series Routers

Configuring the Junos OS to Enable an M160 Router to Operate in Packet Scheduling Mode

Configuring the Junos OS to Make an SFM Stay Offline

Configuring the Junos OS to Support FPC to FEB Connectivity on M120 Routers

Configuring the Junos OS to Support Eight Queues on IQ Interfaces for T Series and M320 Routers

Configuring the Junos OS to Support Entry-Level Configuration on an M320 Router with a Minimum Number of SIBs and PIMs

Configuring MX Series Chassis-Level Features

Configuring Port-Mirroring Instances on MX Series Ethernet Services Routers

Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs for MX Series Routers

Configuring the Number of Active Ports on a 16-Port 10-Gigabit Ethernet MPC on MX Series Routers

Configuring Tunnel Interfaces on an MX Series Router with a 16x10GE 3D MPC

Configuring the Power-On Sequence for DPCs on MX Series Routers with the Enhanced AC PEM

Configuring the Junos OS to Support Layer 2 Services on MX Series Ethernet Services Routers with MS-DPCs

Configuring the Junos OS to Enable Session Offloading on MX Series Ethernet Services Routers with MS-DPCs

Configuring the Junos OS to Support Tunnel Interfaces on MX Series Ethernet Services Routers

Configuring the Junos OS to Run in the IP and Ethernet Services Mode in MX Series Routers

Configuring J Series Chassis-Level Features

Configuring the Junos OS to Prevent the Resetting of the Factory Default or Rescue Configuration During Current Configuration Failure on J Series Routers

Configuring the Junos OS to Support the uPIM Mode on J Series Routers

Configuring the Junos OS to Set a PIM Offline on J Series Routers

Configuring the Junos OS to Disable Power Management on the J Series Chassis

Configuring J Series Services Router Switching Interfaces

Configuring PIC-Specific Features

Configuring the Junos OS to Make a Flexible PIC Concentrator Stay Offline

Configuring the Junos OS to Enable SONET/SDH Framing for SONET/SDH PICs

Configuring the Junos OS to Use ATM Cell-Relay Accumulation Mode on an ATM1 PIC

Configuring the Junos OS to Support the Sparse DLCI Mode on Channelized STM1 or Channelized DS3 PICs

Configuring the Junos OS to Enable a SONET PIC to Operate in Channelized (Multiplexed) Mode

Configuring the Junos OS to Support Channel Groups and Time Slots for Channelized E1 PICs

Configuring the Junos OS to Support ILMI for Cell Relay Encapsulation on an ATM2 IQ PIC

Configuring the Junos OS to Support the Link Services PIC

Configuring the Junos OS to Enable Larger Delay Buffers for T1, E1, and DS0 Interfaces Configured on Channelized IQ PICs

Configuring Resynchronization of FPC Sequence Numbers when a new FPC is Brought Online

Configuring the Junos OS to Resynchronize FPC Sequence Numbers with Active FPCs when an FPC Comes Online

Configuring Chassis Settings to Support Aggregated Devices

Configuring the Junos OS for Supporting Aggregated Devices

Configuring Chassis Settings to Support Load Balancing

Configuring ECMP Next Hops for RSVP and LDP LSPs for Load Balancing

Configuring Chassis Settings to Support Channelized Interfaces

Configuring the Junos OS to Support Channelized DS3-to-DS0 Naming for Channel Groups and Time Slots

Configuring the Junos OS to Support Channelized STM1 Interface Virtual Tributary Mapping

Configuring Chassis Settings to Support Adaptive Services Interfaces

Configuring the Junos OS to Enable Service Packages on Adaptive Services Interfaces

Configuring Chassis Settings to Support External Clock Synchronization

Configuring the Junos OS to Support an External Clock Synchronization Interface for M Series and T Series Routers

Configuring Chassis Settings to Support ATM Devices

Configuring the Junos OS to Enable ATM2 Intelligent Queuing Layer 2 Circuit Transport Mode

Configuring the Junos OS to Enable Idle Cell Format and Payload Patterns for ATM Devices

Configuring Chassis Settings for Routing Engines and Packet Forwarding Engines

Configuring the Junos OS to Support Redundancy on Routers Having Multiple Routing Engines or Switching Boards

Configuring the Junos OS to Allocate More Memory for Routing Tables

Configuring the Junos OS to Enable a Routing Engine to Reboot on Hard Disk Errors

Associating Sampling Instances for Active Flow Monitoring with a Specific Packet Forwarding Engine

Configuring Chassis Settings for the Craft Interface

Configuring the Junos OS to Disable the Physical Operation of the Craft Interface

Configuring Chassis Settings for Alarms

Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different Interface Types

Silencing External Devices Connected to the Alarm Relay Contacts

Examples

Examples: Configuring PIC-Level Symmetrical Hashing for Load Balancing on 802.3ad LAGs on MX Series Routers

Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC

Example: Configuring J Series Services Router Switching Interfaces

Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC

Example: Configuring Tunnel Interfaces on a 10-Gigabit Ethernet 4-Port DPC

Configuration Statements

[edit chassis] Hierarchy Level

Chassis Configuration Statements

Administrative Commands

clear chassis display message

request chassis cb

request chassis cfeb

request chassis cip

request chassis fabric plane

request chassis feb

request chassis fpc

request chassis fpm resync

request chassis lcc

request chassis mic

request chassis mcs

request chassis mic

request chassis pcg

request chassis pic

request chassis redundancy feb slot

request chassis routing-engine master

request chassis scg

request chassis sfm master switch

request chassis sfm

request chassis sib

request chassis sib f13 train-link-receive slot

request chassis sib f13 train-link-transmit slot

request chassis sib train-link-receive slot

request chassis sib train-link-transmit slot

request chassis spmb restart

request chassis synchronization switch

set chassis display message

Monitoring Commands

show chassis alarms

show chassis cfeb

show chassis cip

show chassis environment

show chassis environment cb

show chassis environment fpc

show chassis environment fpm

show chassis environment mcs

show chassis environment

show chassis environment pcg

show chassis environment pem

show chassis environment routing-engine

show chassis environment scg

show chassis environment sfm

show chassis environment sib

show chassis ethernet-switch

show chassis fan

show chassis fabric feb

show chassis fabric errors

show chassis fabric fpcs

show chassis fabric map

show chassis fabric plane

show chassis fabric plane-location

show chassis fabric sibs

show chassis fabric topology

show chassis feb

show chassis firmware

show chassis forwarding

show chassis fpc

show chassis fpc-feb-connectivity

show chassis hardware

show chassis in-service-upgrade

show chassis lccs

show chassis location

show chassis mac-addresses

show chassis network services

show chassis pic

show chassis power-ratings

show chassis power

show chassis psd

show chassis redundancy feb

show chassis routing-engine

show chassis scb

show chassis sfm

show chassis sibs

show chassis spmb

show chassis spmb sibs

show chassis synchronization

show chassis temperature-thresholds

Published: 2010-07-12

Help
|
My Account
|
Log Out