Junos® OS, Release 10.3
Ethernet Operations, Administration, and Maintenance
Ethernet OAM Connectivity Fault Management
Ethernet Frame Delay Measurements
Ethernet OAM Link Fault Management
Ethernet Ring Protection
Ethernet Ring Protection Using Ring Instances for Load Balancing
Configuring MEP Interfaces to Support Ethernet Frame Delay Measurements
Triggering an Ethernet Frame Delay Measurements Session
Viewing Ethernet Frame Delay Measurements Statistics
Example: Configuring Ethernet CFM over VPLS
Example: Configuring Ethernet CFM on Bridge Connections
Example: Configuring Ethernet CFM on Physical Interfaces
Example: Configuring One-Way Ethernet Frame Delay Measurements with Single-Tagged Interfaces
Example: Configuring Two-Way Ethernet Frame Delay Measurements with Single-Tagged Interfaces
Example: Configuring Ethernet Frame Delay Measurements with Untagged Interfaces
Example: Configuring Ethernet LFM Between PE and CE
Example: Configuring Ethernet LFM for CCC
Example: Configuring Ethernet LFM for Aggregated Ethernet
Example: Configuring Ethernet LFM with Loopback Support
Example: Configuring Ethernet Ring Protection for MX Series Routers
Example: Configuring Load Balancing Within Ethernet Ring Protection for MX Series Routers
Example: Viewing Ethernet Ring Protection Status—Normal Ring Operation
Example: Viewing Ethernet Ring Protection Status—Ring Failure Condition
Juniper Knowledge Base
