EX Series Switch Software Features Overview
Understanding Software Infrastructure and Processes
Connecting and Configuring an EX Series Switch (CLI Procedure)
Connecting and Configuring an EX Series Switch (J-Web Procedure)
Configuring the LCD Panel on EX Series Switches (CLI Procedure)
Configuring Date and Time for the EX Series Switch (J-Web Procedure)
Configuring System Identity for the EX Series Switch (J-Web Procedure)
arp
authentication-key
auxiliary
boot-server (NTP)
broadcast
broadcast-client
console (Physical Port)
default-address-selection
domain-name (Router)
gre-path-mtu-discovery
host-name
icmpv4-rate-limit
icmpv6-rate-limit
inet6-backup-router
internet-options
ipip-path-mtu-discovery
ipv6-duplicate-addr-detection-transmits
ipv6-path-mtu-discovery
ipv6-path-mtu-discovery-timeout
ipv6-reject-zero-hop-limit
lcd-menu
location
menu-item
multicast-client
no-multicast-echo
no-ping-record-route
no-ping-time-stamp
no-redirects
no-tcp-rfc1323
no-tcp-rfc1323-paws
ntp
path-mtu-discovery
peer
ports
processes
server (NTP)
tcp-drop-synfin-set
traceoptions (SBC Configuration Process)
trusted-key
clear chassis display message
clear system reboot
configure
op
request chassis pic
request chassis routing-engine master
request system halt
request system logout
request system power-off
request system reboot
request system scripts convert
request system scripts refresh-from commit
request system scripts refresh-from event
request system scripts refresh-from op
request system storage cleanup
restart
set chassis display message
set date
show chassis firmware
show chassis lcd
show configuration
show host
show ntp associations
show ntp status
show system firmware
show system reboot
show system snapshot
show system software
show system storage
show system switchover
show system uptime
show system users
show system virtual-memory
show task replication
show version
http://kb.juniper.net/
