Introduction to VPLS
VPLS Routing and Virtual Ports
VPLS and Aggregated Ethernet Interfaces
VPLS Multihoming
Interoperability between BGP Signaling and LDP Signaling in VPLS
VPLS Label Blocks Operation
PE Router Mesh Groups for VPLS Routing Instances
Configuring an Ethernet Switch as the CE Device
Introduction to Configuring VPLS
Configuring VPLS Routing Instances
Configuring Static Pseudowires for VPLS
Configuring EXP-Based Traffic Classification for VPLS
Configuring Interfaces for VPLS Routing
Configuring VPLS Load Balancing
Configuring VPLS Fast Reroute Priority
Configuring VPLS Without a Tunnel Services PIC
Mapping VPLS Traffic to Specific LSPs
Configuring Firewall Filters and Policers for VPLS
Specifying the VT Interfaces Used by VPLS Routing Instances
Configuring VPLS Multihoming
Flooding Unknown Traffic Using Point-to-Multipoint LSPs
Configuring VPLS and Integrated Routing and Bridging
Configuring Interoperability Between BGP Signaling and LDP Signaling in VPLS
Tracing VPLS Traffic and Operations
Configuring the Label Block Size
Example: Building a VPLS From Router 1 to Router 3
Supported Platforms and PICs
VPLS Standards
Configuring Port Mirroring for VPLS Traffic
active-interface
automatic-site-id
connectivity-type
encapsulation
family multiservice
fast-reroute-priority
interface
interface-mac-limit
label-block-size
label-switched-path-template
local-switching
mac-flush
mac-table-aging-time
mac-table-size
mesh-group
multi-homing
neighbor
no-local-switching
no-tunnel-services
peer-as
rsvp-te
site
site-identifier
site-preference
site-range
static
template
traceoptions
tunnel-services
vlan-id
vlan-id-list
vlan-tagging
vpls
vpls-id
http://kb.juniper.net/
