MBGP MPLS Multicast VPN Sites
PIM Sparse Mode, PIM Dense Mode, Auto-RP, and BSR for MBGP MVPNs
Using Wildcards to Configure Selective Point-to-Multipoint LSPs for an MBGP MVPN
Introduction to Configuring MBGP MVPNs
Configuring Routing Instances for an MBGP MVPN
Configuring SPT-Only Mode for Multiprotocol BGP-Based Multicast VPNs
Configuring Shared-Tree Data Distribution Across Provider Cores for Providers of MBGP MVPNs
Limiting Routes to Be Advertised by an MVPN VRF Instance
Configuring VRF Route Targets for Routing Instances for an MBGP MVPN
Configuring NLRI Parameters for an MBGP MVPN
Configuring PIM Provider Tunnels for an MBGP MVPN
Configuring PIM-SSM GRE Selective Provider Tunnels
Configuring Point-to-Multipoint LSPs for an MBGP MVPN
Configuring a Selective Provider Tunnel Using Wildcards
Example: Configuring Selective Provider Tunnels Using Wildcards
Tracing MBGP MVPN Traffic and Operations
Multicast VPN Terminology
Multicast VPN Standards
export-target
family
group
group-range
import-target
inet-mvpn
inet6-mvpn
label-switched-path-template
mvpn
mvpn-mode
pim-asm
pim-ssm
provider-tunnel
route-target
rpt-spt
rsvp-te
selective
source
spt-only
static-lsp
target
threshold-rate
traceoptions
tunnel-limit
unicast
vrf-advertise-selective
wildcard-group-inet
wildcard-group-inet6
wildcard-source
http://kb.juniper.net/
