Junos® OS, Release 10.3
T3 Interfaces Overview
Configuring T3 Physical Interface Properties
Configuring T3 BERT Properties
Disabling T3 C-Bit Parity Mode
Configuring the T3 CSU Compatibility Mode
Configuring the T3 Frame Checksum
Configuring the T3 FEAC Response
Configuring the T3 Idle Cycle Flag
Configuring the T3 Line Buildout
Configuring the Channelized T3 Loop Timing
Configuring T3 Loopback Capability
Configuring the Maintenance End Point Priority
Configuring T3 Start and End Flags
Examples: Configuring T3 Interfaces
[edit interfaces] Hierarchy Level
[edit logical-systems] Hierarchy Level
bert-algorithm
bert-error-rate
bert-period
cbit-parity
compatibility-mode
e3-options
fcs
feac-loop-respond
idle-cycle-flag
long-buildout
loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3)
loop-timing
payload-scrambler
start-end-flag
t3-options
show interfaces (T3 or E3)
Junos® Operational Mode Commands, Release 10.3.
Interface Diagnostics
Juniper Knowledge Base
