Junos® OS, Release 10.3
IEEE 802.3ah OAM Link-Fault Management Overview
Configuring IEEE 802.3ah OAM Link-Fault Management
Enabling IEEE 802.3ah OAM Support
Configuring Link Discovery
Configuring the OAM PDU Interval
Configuring the OAM PDU Threshold
Configuring Threshold Values for Local Fault Events on an Interface
Disabling the Sending of Link Event TLVs
Detecting Remote Faults
Configuring an OAM Action Profile
Specifying the Actions to Be Taken for Link-Fault Management Events
Monitoring the Loss of Link Adjacency
Monitoring Protocol Status
Configuring Threshold Values for Fault Events in an Action Profile
Applying an Action Profile
Setting a Remote Interface into Loopback Mode
Enabling Remote Loopback Support on the Local Interface
Example: Configuring IEEE 802.3ah OAM Support on an Interface
[edit protocols oam] Hierarchy Level
action (OAM)
action-profile (Defining for LFM)
allow-remote-loopback
apply-action-profile
ethernet (Protocols OAM)
event
event-thresholds
frame-error
frame-period
frame-period-summary
interface (OAM Link-Fault Management)
link-adjacency-loss
link-down
link-discovery
link-event-rate
link-fault-management
negotiation-options
no-allow-link-events
oam
pdu-interval
pdu-threshold
protocol-down
remote-loopback
send-critical-event
symbol-period
syslog (OAM Action)
show oam ethernet link-fault-management
show interfaces (Fast Ethernet)
show interfaces (10-Gigabit Ethernet)
Ethernet Interface Operational Mode Commands
Junos® Operational Mode Commands, Release 10.3.
traceroute ethernet
Interface Diagnostics
Juniper Knowledge Base
