Junos® OS, Release 10.3
IEEE 802.1ag OAM Connectivity Fault Management Overview
Creating the Maintenance Domain
Configuring Maintenance Intermediate Points
Creating a Maintenance Association
Continuity Check Protocol
Configuring a Maintenance Endpoint
Configuring a Connectivity Fault Management Action Profile
Configuring Linktrace Protocol in CFM
Configuring Ethernet Local Management Interface
Configuring Port Status TLV and Interface Status TLV
Configuring M120 and MX Series Routers for CCC Encapsulated Packets
Configuring Rate Limiting of Ethernet OAM Messages
Configuring 802.1ag Ethernet OAM for VPLS
Example: Configuring Ethernet CFM over VPLS
[edit interfaces] Hierarchy Level
[edit logical-systems] Hierarchy Level
[edit protocols oam] Hierarchy Level
action-profile (Defining for CFM)
age
bridge-domain
connectivity-fault-management
continuity-check
direction
ethernet (Protocols OAM)
evcs
instance
interface-status-tlv
level
linktrace
lmi (Ethernet OAM)
lowest-priority-defect
maintenance-association
maintenance-domain
mep
mip-half-function
oam
policer (CFM Firewall)
policer (CFM Global)
policer (CFM Session)
port-status-tlv
routing-instance
virtual-switch
show interfaces (Aggregated Ethernet)
show interfaces demux0 (Demux Interfaces)
show interfaces (Fast Ethernet)
show interfaces (10-Gigabit Ethernet)
show interfaces interface-set (Ethernet Interface Set)
show oam ethernet connectivity-fault-management delay-statistics
show oam ethernet connectivity-fault-management forwarding-state
show oam ethernet connectivity-fault-management interfaces
show oam ethernet connectivity-fault-management linktrace path-database
show oam ethernet connectivity-fault-management mep-database
show oam ethernet connectivity-fault-management mep-statistics
show oam ethernet connectivity-fault-management path-database
show oam ethernet evc
show oam ethernet link-fault-management
show oam ethernet lmi
show oam ethernet lmi statistics
Ethernet Interface Operational Mode Commands
Junos® Operational Mode Commands, Release 10.3.
traceroute ethernet
Interface Diagnostics
Juniper Knowledge Base