Junos® OS, Release 10.3
Interface Encapsulations Overview
ATM1 Physical and Logical Configuration Statement Hierarchies
ATM2 IQ Physical and Logical Configuration Statement Hierarchies
Supported Features on ATM1 and ATM2 IQ Interfaces
Configuring Communication with Directly Attached ATM Switches and Routers
Enabling ILMI for Cell Relay
Enabling Passive Monitoring on ATM Interfaces
Removing MPLS Labels from Incoming Packets
Configuring the ATM PIC Type
Configuring ATM Cell-Relay Promiscuous Mode
Configuring the Maximum Number of ATM1 VCs on a VP
Configuring Layer 2 Circuit Transport Mode
Configuring Layer 2 Circuit Cell-Relay Promiscuous Mode
Configuring Layer 2 Circuit Trunk Mode Scheduling
Configuring CoS Queues in Layer 2 Circuit Trunk Mode
Configuring the Layer 2 Circuit Cell-Relay Cell Maximum
Configuring the OAM F4 Cell Flows
Defining Virtual Path Tunnels
Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
Configuring a Point-to-Multipoint ATM1 or ATM2 IQ Connection
Configuring a Multicast-Capable ATM1 or ATM2 IQ Connection
Configuring Inverse ATM1 or ATM2 ARP
Defining the ATM Traffic-Shaping Profile
Configuring the ATM1 Queue Length
Configuring the ATM2 IQ EPD Threshold
Configuring Two EPD Thresholds per Queue
Configuring the ATM2 IQ Transmission Weight
Defining the ATM OAM F5 Loopback Cell Period
Configuring the ATM OAM F5 Loopback Cell Threshold
Configuring ATM Interface Encapsulation
Configuring an ATM1 Cell-Relay Circuit
Configuring PPP over ATM2 Encapsulation
Configuring E3 and T3 Parameters on ATM Interfaces
Configuring SONET/SDH Parameters on ATM Interfaces
Configuring ATM2 IQ VC Tunnel CoS Components
Example: Configuring ATM1 Interfaces
Example: Configuring ATM2 IQ Interfaces
[edit interfaces] Hierarchy Level
[edit logical-systems] Hierarchy Level
advertise-interval
allow-any-vci
aps
atm-encapsulation
atm-options
atm-scheduler-map
authentication-key
buildout (E3 or T3 over ATM Interfaces)
bytes
cbit-parity
cbr
cell-bundle-size
down-count
e3-options
encapsulation (Logical Interface)
encapsulation (Physical Interface)
epd-threshold (Logical Interface)
epd-threshold (Physical Interface)
family
force
forwarding-class (ATM2 IQ Scheduler Maps)
framing (E1, E3, and T1 Interfaces)
high-plp-max-threshold
high-plp-threshold
hold-time (APS)
hold-time (SONET/SDH Defect Triggers)
ilmi
inverse-arp
linear-red-profile
linear-red-profiles
lockout
loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3)
low-plp-max-threshold
low-plp-threshold
maximum-vcs
mpls
multicast-vci
multipoint-destination
neighbor
oam-liveness
oam-period
paired-group
passive-monitor-mode
payload-scrambler
pic-type
plp1
plp-to-clp
pop-all-labels
priority (Schedulers)
promiscuous-mode
protect-circuit
queue-depth
queue-length
receive-options-packets
receive-ttl-exceeded
request
required-depth
revert-time
rfc-2615
rtvbr
scheduler-maps
shaping
sonet-options
t3-options
transmit-weight (ATM2 IQ CoS Forwarding Class)
transmit-weight (ATM2 IQ Virtual Circuit)
trigger
trunk-bandwidth
trunk-id
up-count
vbr
vc-cos-mode
vci
vpi (ATM CCC Cell-Relay Promiscuous Mode)
vpi (Define Virtual Path)
vpi (Logical Interface and Interworking)
working-circuit
z0-increment
show class-of-service
show class-of-service forwarding-class
show ilmi
show interfaces (ATM)
show interfaces (ATM-over-ADSL)
show interfaces (ATM-over-SHDSL)
show interfaces queue
Junos® Operational Mode Commands, Release 10.3.
Interface Diagnostics
Juniper Knowledge Base