Configuring Flow Collection Mode and Interfaces on Services PICs
You can select the services PIC to run in either flow collection mode or monitoring mode, but not both.
To set the services PIC to run in flow collection mode, include the flow-collector statement at the [edit chassis fpc slot-number pic pic-number monitoring-services application] hierarchy level:
[edit chassis fpc slot-number pic pic-number monitoring-services application]flow-collector;
For further information on configuring chassis properties, see the Junos System Basics Configuration Guide.
To specify flow collection interfaces, you configure the cp interface at the [edit interfaces] hierarchy level:
[edit interfaces]cp-fpc/pic/port {...}
