Tracing RIP Protocol Traffic
You can trace various types of RIP protocol traffic to help debug RIP protocol issues. To trace RIP protocol traffic include the traceoptions statement at the [edit protocols rip] hierarchy level:
You can specify the following RIP protocol-specific trace options using the flag statement:
- auth—RIP authentication
- error—RIP error packets
- expiration—RIP route expiration processing
- holddown—RIP hold-down processing
- nsr-synchronization—Nonstop active routing synchronization events
- packets—All RIP packets
- request—RIP information packets
- trigger—RIP triggered updates
- update—RIP update packets
You can optionally specify one or more of the following flag modifiers:
- detail—Detailed trace information
- receive—Packets being received
- send—Packets being transmitted
Note: Use the detail flag modifier with caution as this may cause the CPU to become very busy.
Global tracing options are inherited from the configuration set by the traceoptions statement at the [edit routing-options] hierarchy level. You can override the following global trace options for the RIP protocol using the traceoptions flag statement included at the [edit protocols rip] hierarchy level:
- all—All tracing operations
- general—All normal operations and routing table changes (a combination of the normal and route trace operations)
- normal—Normal events
- policy—Policy processing
- route—Routing information
- state—State transitions
- task—Routing protocol task processing
- timer—Routing protocol timer processing
| Note: Use the trace flag all with caution because this may cause the CPU to become very busy. |
Example: Tracing RIP Protocol Traffic
Trace only unusual or abnormal operations to /var/log/routing-log, and trace detailed information about all RIP packets to /var/log/rip-log:
Related Topics
- traceoptions statement
- For general information about tracing and global tracing options, see Tracing Global Routing Protocol Operations.
