Removing the Outer and Inner VLAN Tags

On Ethernet IQ, IQ2 and IQ2-E interfaces, on MX Series router Gigabit Ethernet, Tri-Rate Ethernet copper, and 10-Gigabit Ethernet interfaces, and on aggregated Ethernet interfaces using Gigabit Ethernet IQ2 and IQ2-E or 10-Gigabit Ethernet PICs on MX Series routers, to remove both the outer and inner VLAN tags of the frame, include the pop-pop statement in the input VLAN map or output VLAN map:

You can include this statement at the following hierarchy levels:

• [edit interfaces interface-name unit logical-unit-number input-vlan-map]
• [edit interfaces interface-name unit logical-unit-number output-vlan-map]
• [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map]
• [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]

See Configuring Inner and Outer TPIDs and VLAN IDs and Configuring Inner and Outer TPIDs and VLAN IDs for information about configuring inner and outer VLAN ID values and inner and outer TPID values required for VLAN maps.