Configuring the Maintenance End Point Interface
You must specify the interface to which the MEP is attached. It can be a physical interface, logical interface or trunk interface.
On MX Series routers, you can enable the MEP on a specific VLAN of a trunk interface.
To configure the interface, include the interface interface-name statement at the [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name maintenance-association ma-name mep mep-id] hierarchy level.
MEP Interface Configuration
This example shows the MEP interface configuration statements:
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain domain-name maintenance-association ma-name]mep mep-id {direction (up | down);interface (ge | xe)-(fpc/pic/port | fpc/pic/port.domain | fpc/pic/port.domain vlan vlan-id);auto-discovery; priority number;}
