• Supported Platforms
• MX Series

• Related Topics
• Dynamic 802.1Q VLAN Overview
• Configuring VLAN Dynamic Profiles
• Configuring VLAN Interfaces to Use Dynamic Profiles

Configuring Single-Level VLAN Ranges for Use with VLAN Dynamic Profiles

You configure VLAN ranges at the [edit interfaces] hierarchy level by specifying the vlan-tagging statement for the interface and defining VLAN ranges for use with a VLAN dynamic profile.

To configure a VLAN range:

1. Access the interface over which you want to create dynamic VLANs.
   user@host# edit interfaces ge-0/0/0
2. Specify the vlan-tagging statement to indicate that this interface is for use with stacked VLAN ranges.
   [edit interfaces ge-0/0/0]user@host# set vlan-tagging
3. Access the VLAN [auto-configure] hierarchy level.
   [edit interfaces ge-0/0/0]user@host# edit auto-configure
4. Access the [vlan-ranges] hierarchy level.
   [edit interfaces ge-0/0/0 auto-configure]user@host# edit vlan-ranges
5. Access the VLAN dynamic profile for which you want to configure VLAN ranges.
   [edit interfaces ge-0/0/0 auto-configure vlan-ranges]user@host# edit dynamic-profile VLAN-PROF1
6. Specify the VLAN ranges that you want the dynamic profile to use. The following example specifies a lower VLAN ID limit of 3000 and any upper VLAN ID limit (a range from 1 through 4094).
   [edit interfaces ge-0/0/0 auto-configure vlan-ranges]user@host# set ranges 3000-any