Configuring a Gateway Controller
To configure a gateway controller:
- Create a gateway controller configuration, and
assign a name to the gateway controller. [edit services pgcp gateway bgf-1]user@host# edit gateway-controller bsg-1
- Specify the BSG to control the virtual
BGF.[edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set local-controller bsg-1
- Specify the IP address of the gateway
controller. This is the address of the services PIC or DPC that you
configured for the BSG.[edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set controller-address 10.10.200.20
- Configure the number of the gateway controller
listening port. [edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set controller-port 2944
