jnxL2tpTunnelStatsLocalTID

jnxL2tpTunnelStatsEntry 1

The local tunnel Identifier.

jnxL2tpTunnelStatsServiceInterfac

jnxL2tpTunnelStatsEntry 2

The name of the service interface on which the tunnel is being hosted.

jnxL2tpTunnelStatsTunnelGroup

jnxL2tpTunnelStatsEntry 3

The name of the tunnel group to which the tunnel belongs.

jnxL2tpTunnelStatsRemoteTID

jnxL2tpTunnelStatsEntry 4

The remote tunnel identifier. See RFC 2661, Section 3.1.

jnxL2tpTunnelStatsRemoteIpAddrType

jnxL2tpTunnelStatsEntry 5

The type of the remote-end address of the tunnel.

jnxL2tpTunnelStatsRemoteIpAddress

jnxL2tpTunnelStatsEntry 6

The remote-end address of the tunnel.

jnxL2tpTunnelStatsRemoteUdpPort

jnxL2tpTunnelStatsEntry 7

The remote-end UDP port of the tunnel.

jnxL2tpTunnelStatsActiveSessions

jnxL2tpTunnelStatsEntry 8

The total number of sessions that are in established state for the tunnel.

jnxL2tpTunnelStatsStat

jnxL2tpTunnelStatsEntry 9

One of the following states for the control tunnel:

• cc_responder_accept_new—shows that the tunnel has received and accepted the start control connection request (SCCRQ).
• cc_responder_reject_new—shows that the tunnel has received and rejected the SCCRQ.
• cc_responder_idle—shows that the tunnel has just been created.
• cc_responder_wait_ctl_conn—shows that the tunnel has sent the start control connection response (SCCRP) and is waiting for the start control connection connected (SCCCN) message.
• Cleanup—shows that the tunnel is being cleaned up.
• Closed—shows that the tunnel is being closed.
• Destroyed—shows that the tunnel is being destroyed.
• Established—shows that the tunnel is operational.
• Terminate—shows that the tunnel is being terminated.
• Unknown—shows that the tunnel is not connected to the router.

jnxL2tpTunnelStatsLocalIpAddrType

jnxL2tpTunnelStatsEntry 10

The type of local-end address of the tunnel.

jnxL2tpTunnelStatsLocalIpAddress

jnxL2tpTunnelStatsEntry 11

The local-end address of the tunnel.

jnxL2tpTunnelStatsLocalUdpPort

jnxL2tpTunnelStatsEntry 12

The local-end UDP port number of the tunnel.

jnxL2tpTunnelStatsLocalHostName

jnxL2tpTunnelStatsEntry 13

The local hostname of the tunnel.

jnxL2tpTunnelStatsRemoteHostName

jnxL2tpTunnelStatsEntry 14

The hostname of the L2TP peer, as discovered during the tunnel establishment phase (using the Host Name AVP). If the tunnel is idle, this object shows the value based on the data from the last time it was connected.

jnxL2tpTunnelMaxSessions

jnxL2tpTunnelStatsEntry 15

The maximum number of sessions configured on the tunnel. Value could be a positive number or zero (unlimited).

jnxL2tpTunnelStatsWindowSize

jnxL2tpTunnelStatsEntry 16

The send window size for the tunnel.

jnxL2tpTunnelStatsHelloInterval

jnxL2tpTunnelStatsEntry 17

The hello interval for the tunnel.

jnxL2tpTunnelStatsCreationTime

jnxL2tpTunnelStatsEntry 18

The time when the tunnel was creaed.

jnxL2tpTunnelStatsUpTime

jnxL2tpTunnelStatsEntry 19

The time elapsed since the tunnel was established.

jnxL2tpTunnelStatsIdleTime

jnxL2tpTunnelStatsEntry 20

The time elapsed since the last data activity, transmission or reception, on the tunnel.

jnxL2tpTunnelStatsCollectionStart

jnxL2tpTunnelStatsEntry 21

The time at which the statistics gathering started for the tunnel.

jnxL2tpTunnelStatsControlTxPkts

jnxL2tpTunnelStatsEntry 22

The number of control packets transmitted to the tunnel peer.

jnxL2tpTunnelStatsControlTxBytes

jnxL2tpTunnelStatsEntry 23

The number of control bytes transmitted to the tunnel peer.

jnxL2tpTunnelStatsControlRxPkts

jnxL2tpTunnelStatsEntry 24

The number of control packets received on the tunnel.

jnxL2tpTunnelStatsControlRxByte

jnxL2tpTunnelStatsEntry 25

The number of control bytes received from the tunnel peer.

jnxL2tpTunnelStatsDataTxPkts

jnxL2tpTunnelStatsEntry 26

The number of data packets transmitted to the tunnel.

jnxL2tpTunnelStatsDataTxBytes

jnxL2tpTunnelStatsEntry 27

The number of data bytes transmitted to the tunnel peer.

JnxL2tpTunnelStatsDataRxPkts

jnxL2tpTunnelStatsEntry 28

The number of data packets received from the tunnel.

jnxL2tpTunnelStatsDataRxBytes

jnxL2tpTunnelStatsEntry 29

The number of data bytes received from the tunnel peer.

jnxL2tpTunnelStatsErrorTxPkts

jnxL2tpTunnelStatsEntry 30

The number of error transmits packets on the tunnel.

jnxL2tpTunnelStatsErrorRxPkts

jnxL2tpTunnelStatsEntry 31

The number of error receive packets on the tunnel.