Technical Documentation

Supported Platforms
EX Series

Related Topics
Configuring IGMP Snooping (CLI Procedure)
IGMP Snooping on EX Series Switches Overview

vlan

Syntax

vlan (vlan-id | vlan-name) {data-forwarding {source {groups group-prefix;}receiver {source-vlans vlan-list;install ;}}disable {interface interface-name;}immediate-leave;interface interface-name {group-limit limit;multicast-router-interface;static (IGMP Snooping) {group ip-address;}}proxy ;query-interval seconds;query-last-member-interval seconds;query-response-interval seconds;robust-count number;}

Hierarchy Level

[edit protocols igmp-snooping]

Release Information

Statement introduced in Junos OS Release 9.1 for EX Series switches.

Statement updated with enhanced ? (CLI completion feature) functionality in Junos OS Release 9.5 for EX Series switches.

Description

Configure IGMP snooping parameters for a VLAN.

The remaining statements are explained separately.

Tip: To display a list of all configured VLANs on the system, including VLANs that are configured but not committed, type ? after vlan or vlans in your configuration mode command line. Note that only one VLAN is displayed for a VLAN range. For IGMP snooping, secondary private VLANs are not listed.

Default

IGMP snooping options apply to the specified VLAN.

Options

vlan-id—Numeric tag for a VLAN.

Range: 0 through 4095. Tags 0 and 4095 are reserved by Junos OS, and you should not configure them.

vlan-name—Name of a VLAN.

Required Privilege Level

routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.