sustained-data-rate (RTCP Streams)
Syntax
sustained-data-rate {rtcp (fixed-value bytes-per-second | percentage percentage);}
Hierarchy Level
[edit services pgcp gateway gateway-name h248-properties traffic-management]
Release Information
Statement introduced in Junos OS Release 9.2.
Description
Configure the sustained data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of RTP’s sustained data rate.
Default
The virtual BGF uses the default value of 5 percent of the RTP gates’s rate if the Policy command in H.248 messages in ON and both of the following apply:
- The sustained data rate is not set in the H.248 message.
- There is no CLI configuration for sustained data rate.
Options
fixed-value —Value entered is a fixed number of bits per second.
bytes-per-second—Sustained data rate.
- Range: 125 through 4,294,967,295
percentage bytes-per-second—Value entered is a percentage of the RTP’s gate rate.
percentage—Value entered is a percentage of the RTP’s gate rate.
- Range: 0 through 1000
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Topics
- Rate-Limiting for VoIP Traffic Overview and Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
