post-service-filter (Dynamic Service Sets)
Syntax
post-service-filter filter-name;
Hierarchy Level
[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number family family service input],[edit dynamic-profiles profile-name interfaces pp0 unit “$junos–interface–unit” family family service input]
Release Information
Statement introduced in Junos OS Release 9.5.
The [edit dynamic-profiles profile-name interfaces pp0 unit “$junos-interface-unit” family family service input] hierarchy added in Junos 10.1.
Description
Define the filter to be applied to traffic after service processing. The filter is applied only if a service set is configured and selected. You can configure a postservice filter on the input side of the interface only. Only the Internet Protocol version 4 (IPv4) protocol family is currently supported for dynamic PPPoE logical interfaces.
Options
filter-name—Identifier for the post-service filter.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
