peak-data-rate (RTCP)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
Description
Configure the peak data rate for RTP/RTCP gate streams. You can configure this rate as a fixed value or as a percentage of the RTP gate’s rate.
Default
The BGF uses the default value of 5 percent of the RTP gate's rate if the Policy command in H.248 messages in ON and both of the following apply:
- The peak data rate is not set in the H.248 message.
- There is no CLI configuration for peak data rate.
Options
fixed-value —Value entered is a fixed number of bits per second.
bytes-per-second—Peak data rate.
- Range: 125 through 4,294,967,295
percentage —Value entered is a percentage of the RTP gate’s rate.
percentage—Value entered is a percentage of the RTP’s gate rate.
- Range: 0 through 1000
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Topics
Configuring Rate Limiting for the BGF in Session Border Control Solutions Guide Using BGF and IMSG
