oam-period
Syntax
oam-period (disable | seconds);
Hierarchy Level
[edit interfaces interface-name atm-options
vpi vpi-identifier],[edit interfaces interface-name unit logical-unit-number], [edit interfaces interface-name unit logical-unit-number family family address address multipoint-destination address],[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number], [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family address address multipoint-destination address]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For ATM encapsulation only, configure the OAM F5 loopback cell period. Not supported on ATM-over-SHDSL interfaces.
For ATM2 IQ PICs only, configure OAM F4 loopback cell period at the [edit interfaces interface-name atm-options vpi vpi-identifier] hierarchy level.
Default
If you omit this statement, OAM F5 loopback cells are not originated, but the interface still responds if it receives OAM F5 loopback cells.
Options
disable—Disable OAM loopback cell transmit feature.
seconds—OAM loopback cell period.
- Range: 1 through 900 seconds
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
