max-sessions (Dynamic PPPoE)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.1.
Description
Configure the maximum number of dynamic PPPoE logical interfaces that the router can activate on the underlying interface. The max-sessions value does not affect the maximum number of static PPPoE logical interfaces that can be configured on the underlying interface.
Options
number—Maximum number of dynamic PPPoE logical interfaces (sessions) that the router can activate on the underlying interface. The default value is equal to the maximum number of PPPoE sessions supported on your routing platform. You can configure from 1 to the platform-specific default for your routing platform. Changing the max-sessions value has no effect on dynamic PPPoE logical interfaces that are already active.
- Range:
- For Intelligent Queuing 2 (IQ2) PICs on M120 and M320 Series routers, 1 through 4000.
- For Trio MPC/MIC interfaces on MX Series routers, 1 through 32000.
- Default:
- For Intelligent Queuing 2 (IQ2) PICs on M120 and M320 Series routers, 4000.
- For Trio MPC/MIC interfaces on MX Series routers, 32000.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Topics
- Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
- For information about creating static PPPoE interfaces, see the Junos Network Interfaces Configuration Guide
