if-exceeding
Syntax
if-exceeding {bandwidth-limit bps;bandwidth-percent number;burst-size-limit bytes;}
Hierarchy Level
Release Information
Statement introduced before Junos Release 7.4.
Logical systems support introduced in Junos Release 9.3.
Description
Configure policer rate limits.
Options
bandwidth-limit bps—Traffic rate, in bits per second (bps). Any value below 61,040 bps results in an effective rate of 30,520 bps for all routers except the T640, T1600, and TX Matrix routers.
- Range: 8,000 through 40,000,000,000 bps (minimum of 8,000 bps on the MX Series, M120, M320, T640, T1600, and TX-Matrix routers only)
- Range: 32,000 through 40,000,000,000 bps (minimum of 32,000 bps on any platform except for the MX Series, M120, M320, T640, T1600, and TX-Matrix routers)
- Default: None
bandwidth-percent number—Port speed, in decimal percentage number.
- Range: 1 through 100
- Default: None
burst-size-limit bytes—Maximum burst size. The minimum recommended value is the maximum transmission unit (MTU) of the IP packets being policed.
- Range: 1500 through 100,000,000,000 bytes
- Default: None
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
