family mpls
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
no-label-1-exp option introduced in Junos OS Release 8.0.
label-3 and no-labels options introduced in Junos OS Release 8.1.
ether-pseudowire statement introduced in Junos OS Release 9.1 (M320 and T Series routers only); support extended to M120 and MX Series routers in Junos OS Release 9.4.
Description
For aggregated Ethernet and SONET/SDH interfaces only, configure load balancing based on MPLS labels. Only the IPv4 protocol is supported.
Options
label-1—Include only one label in the hash key.
label-2—Include both labels in the hash key.
label-3—Include the third MPLS label in the hash key.
no-labels—Include no MPLS labels in the hash key.
no-label-1-exp—Do not use the EXP bit of the first label in the hash calculation.
payload—Include bits from IP payload in the hash key.
ether-pseudowire (M120, M320, MX Series, and T Series routers)—Load-balance IPv4 traffic over Layer 2 Ethernet pseudowires.
ip—Include the IP address of the IPv4 or IPv6 payload in the hash key.
layer-3-only—Include only Layer 3 IP information.
port-data—Include the source and destination port field information.
source-msb—Include the most significant byte of the source port.
source-lsb—Include the least significant byte of the source port.
destination-msb—Include the most significant byte of the destination port.
destination-lsb—Include the least significant byte of the destination port.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
