Technical Documentation

ethernet-switch-profile

Syntax

ethernet-switch-profile {ethernet-policer-profile {input-priority-map {ieee802.1p premium [ values ];}output-priority-map {classifier {premium {forwarding-class class-name {loss-priority (high | low);}}}}policer cos-policer-name {aggregate {bandwidth-limit bps;burst-size-limit bytes;}premium {bandwidth-limit bps;burst-size-limit bytes;}}tag-protocol-id tpid;}(mac-learn-enable | no-mac-learn-enable);}

Hierarchy Level

[edit interfaces interface-name gigether-options],[edit interfaces interface-name aggregated-ether-options]

Release Information

Statement introduced before Junos OS Release 7.4.

Description

For Gigabit Ethernet IQ, 10-Gigabit Ethernet IQ2 and IQ2-E, and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC, aggregated Ethernet with Gigabit Ethernet IQ interfaces, and the built-in Gigabit Ethernet port on the M7i router), configure VLAN tag and MAC address accounting and filtering properties.

The statements are explained separately.

Note: When you gather interfaces into a bridge domain, the no-mac-learn-enable statement at the [edit interfaces interface-name gigether-options ethernet-switch-profile] hierarchy level is not supported. You must use the no-mac-learning statement at the [edit bridge-domains bridge-domain-name bridge-options interface interface-name] hierarchy level to disable MAC learning on an interface in a bridge domain. For information on disabling MAC learning for a bridge domain, see the MX Series Layer 2 Configuration Guide.

Default

If the ethernet-switch-profile statement is not configured, Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i router) behave like Gigabit Ethernet interfaces.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.