bert-error-rate
Syntax
bert-error-rate rate;
Hierarchy Level
[edit interfaces ce1-fpc/pic/port],[edit interfaces ct1-fpc/pic/port],[edit interfaces interface-name ds0-options],[edit interfaces interface-name e1-options],[edit interfaces interface-name e3-options],[edit interfaces interface-name t1-options],[edit interfaces interface-name t3-options]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Configure the bit error rate to use in a BERT procedure. Applies to E1, E3, T1, or T3 interfaces, and to the channelized interfaces (DS3, OC3, OC12, and STM1).
 | Note: When configuring CE1 or CT1 interfaces on 10-port Channelized E1/T1 IQE PICs, the bert-error-rate statement must be included at the [edit interfaces ce1-fpc/pic/port] or [edit interfaces ct1-fpc/pic/port] hierarchy level as appropriate. |
Options
rate—Bit error rate.
- Range: 0 through 7, which corresponds to 10–1 (1 error per bit) to 10 –7 (1 error per 10 million bits)
- Default: 0
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
