show services stateful-firewall sip-call
Syntax
Release Information
Command introduced in Junos OS Release 7.4.
Description
Display stateful firewall Session Initiation Protocol (SIP) call information.
Options
- count
(Optional) Display a count of the matching entries.
- brief
(Optional) Display brief SIP call information.
- extensive
(Optional) Display detailed SIP call information.
- terse
(Optional) Display terse SIP call information.
- application-protocol
(Optional) Display information about one of the following application protocols:
- bootp—(SIP only) Bootstrap protocol
- dce-rpc—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols
- dce-rpc-portmap—(SIP only) Distributed Computing Environment-Remote Procedure Call protocols portmap service
- dns—(SIP only) Domain Name System protocol
- exec—(SIP only) Exec
- ftp—(SIP only) File Transfer Protocol
- h323—H.323 standards
- icmp—Internet Control Message Protocol
- iiop—Internet Inter-ORB Protocol
- login—Login
- netbios—NetBIOS
- netshow—NetShow
- realaudio—RealAudio
- rpc—Remote Procedure Call protocol
- rpc-portmap—Remote Procedure Call protocol portmap service
- rtsp—Real-Time Streaming Protocol
- shell—Shell
- sip—Session Initiation Protocol
- snmp—Simple Network Management Protocol
- sqlnet—SQLNet
- tftp—Trivial File Transfer Protocol
- traceroute—Traceroute
- winframe—WinFrame
- destination-port destination-port
(Optional) Display information for a particular destination port. The range of values is from 0 to 65535.
- destination-prefix destination-prefix
(Optional) Display information for a particular destination prefix.
- interface interface-name
(Optional) Display information about a particular adaptive services interface. On M Series and T Series routers, interface-name can be sp-fpc/pic/port or rspnumber. On J Series routers, interface-name is sp-pim/0/port.
- limit number
(Optional) Maximum number of entries to display.
- protocol
(Optional) Display information about one of the following IP types:
- ah—IPsec Authentication Header protocol
- egp—An exterior gateway protocol
- esp—IPsec Encapsulating Security Payload protocol
- gre—A generic routing encapsulation protocol
- icmp—Internet Control Message Protocol
- igmp—Internet Group Management Protocol
- ipip—IP-within-IP Encapsulation Protocol
- ipv6—IPv6 within IP
- ospf—Open Shortest Path First protocol
- pim—Protocol Independent Multicast protocol
- rsvp—Resource Reservation Protocol
- sctp—Stream Control Protocol
- tcp—Transmission Control Protocol
- udp—User Datagram Protocol
- service-set service-set
(Optional) Display information for a particular service set.
- source-port source-port
(Optional) Display information for a particular source port. The range of values is from 0 to 65535.
- source-prefix source-prefix
(Optional) Display information for a particular source prefix.
Required Privilege Level
view
Related Topics
List of Sample Output
show services stateful-firewall sip-call extensiveOutput Fields
Table 1 lists the output fields for the show services stateful-firewall sip-call command. Output fields are listed in the approximate order in which they appear.
Table 1: show services stateful-firewall sip-call Output Fields
Field Name | Field Description |
|---|---|
Interface | Name of an adaptive services interface. |
Service set | Name of a service set. |
From | Initiator address. |
To | Responder address. |
Call ID | SIP call identification string. |
Number of initiator flows | Number of control, contact, or media initiator flows. |
Number of responder flows | Number of control, contact, or media responder flows. |
protocol | Protocol used for this flow. |
source-prefix | Source prefix of the flow in the format source-prefix : port. |
destination-prefix | Destination prefix of the flow. |
state | Status of the flow:
|
direction | Direction of the flow: input (I), output (O), or unknown (U). |
frame-count | Number of frames in the flow. |
Byte count | Number of bytes forwarded in the flow. |
Flow role | Role of the flow that is under evaluation: Initiator, Master, Responder, or Unknown. |
Timeout | Lifetime of the flow, in seconds. |
Sample Output
show services stateful-firewall sip-call extensive
user@host> show services stateful-firewall sip-call
extensive Interface: sp-0/3/0, Service set: test_sip_777 From: : 6507771234@10.200.100.1:0;000ff73ac89900021bb231dc-3ef68435 To: : 4085551234@10.200.100.1:0;0011bb65c2a30007777bd0fc-5748b749 Call ID: : 000ff73a-c8990004-0741adac-3e027c7e@10.20.70.2 Number of control initiator flows: : 1, Number of control responder flows: : 1 UDP 10.20.70.2:50354 -> 10.200.100.1:5060 Watch I 2 Byte count: 1112 Flow role: Master, Timeout: 30 UDP 10.200.100.1:5060 -> 10.20.170.111:50354 Watch O 0 Byte count: 0 Flow role: Responder, Timeout: 30 UDP 0.0.0.0:0 -> 10.20.170.111:5060 Watch O 7 Byte count: 2749 Flow role: Responder, Timeout: 30 Number of contact initiator flows: 1, Number of contact responder flows: 1 UDP 0.0.0.0:0 -> 10.20.140.11:5060 Watch I 1 Byte count: 409 Flow role: Master, Timeout: 30 UDP 10.20.140.11:31864 -> 10.20.170.111:18808 Forward O 622 Byte count: 124400 Flow role: Master, Timeout: 30 UDP 0.0.0.0:0 -> 10.20.170.111:18809 Forward O 0 Byte count: 0 Flow role: Initiator, Timeout: 30 Number of media initiator flows: 4, Number of media responder flows: 0 UDP 10.20.70.2:18808 -> 10.20.140.11:31864 Forward I 628 Byte count: 125600 Flow role: Initiator, Timeout: 30 UDP 0.0.0.0:0 -> 10.20.140.11:31865 Forward I 0 Byte count: 0 Flow role: Initiator, Timeout: 30 0 0.0.0.0:0 -> 0.0.0.0:0 Unknown U 0 Byte count: 0 Flow role: Unknown, Timeout: 0 0 0.0.0.0:0 -> 0.0.0.0:0 Unknown U Interface: sp-0/3/0, Service set: test_sip_888
