show protection-group ethernet-ring interface
Syntax
Release Information
Command introduced in Junos OS Release 9.4.
Description
On MX Series routers, displays the status of the Automatic Protection Switching (APS) interfaces on an Ethernet ring.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show protection-group ethernet-ring interface (Owner Node, Normal Operation)show protection-group ethernet-ring interface (Ring Node, Normal Operation)
show protection-group ethernet-ring interface (Owner Node, Failure Condition)
show protection-group ethernet-ring interface (Ring Node, Failure Condition)
Output Fields
Table 1 lists the output fields for the show protection-group ethernet-ring interface command. Output fields are listed in the approximate order in which they appear.
Table 1: show protection-group ethernet-ring interface Output Fields
Field Name | Field Description |
|---|---|
Ethernet ring port parameters for protection group group-name | Output is organized by configured protection group. |
Interface | Physical interfaces configured for the Ethernet ring. |
Control Channel | Logical unit configured on the physical interface.
|
Forwarding State | State of the ring forwarding on the interface: discarding or forwarding. |
Ring Protection Link End | Whether this interface is the end of the ring: Yes or No. |
Signal Failure | Whether there a signal failure exists on the link: Clear or Set. |
Admin State | State of the interface: IFF ready or IFF disabled. |
Sample Output
show protection-group ethernet-ring interface (Owner Node, Normal Operation)
user@host> show protection-group ethernet-ring
interfaceEthernet ring port parameters for protection group pg101 Interface Control Channel Forward State Ring Protection Link End ge-1/0/1 ge-1/0/1.1 discarding Yes ge-1/2/4 ge-1/2/4.1 forwarding No Signal Failure Admin State Clear IFF ready Clear IFF ready
show protection-group ethernet-ring interface (Ring Node, Normal Operation)
user@host> show protection-group ethernet-ring
interfaceEthernet ring port parameters for protection group pg102 Interface Control Channel Forward State Ring Protection Link End ge-1/2/1 ge-1/2/1.1 forwarding No ge-1/0/2 ge-1/0/2.1 forwarding No Signal Failure Admin State Clear IFF ready Clear IFF ready
show protection-group ethernet-ring interface (Owner Node, Failure Condition)
user@host> show protection-group ethernet-ring
interfaceEthernet ring port parameters for protection group pg101 Interface Control Channel Forward State Ring Protection Link End ge-1/0/1 ge-1/0/1.1 forwarding Yes ge-1/2/4 ge-1/2/4.1 forwarding No Signal Failure Admin State Clear IFF ready Clear IFF ready
show protection-group ethernet-ring interface (Ring Node, Failure Condition)
user@host> show protection-group ethernet-ring
interfaceEthernet ring port parameters for protection group pg102 Interface Control Channel Forward State Ring Protection Link End ge-1/2/1 ge-1/2/1.1 forwarding No ge-1/0/2 ge-1/0/2.1 discarding No Signal Failure Admin State Clear IFF ready Set IFF ready
