Service Name Table

Name of the PPPoE service name table.

none

Service Name

Name of a configured service in the PPPoE service name table:

• <empty>—Service of zero length that represents an unspecified service
• <any>—Default service for non-empty service entries that do not match the configured empty or named service entries
• service-name—Named service entry

none

Action

Action taken when the PPPoE underlying interface interface receives a PPPoE Active Discovery Initiation (PADI) packet with the specified named service, empty service, any service, or ACI/ARI pair:

• Delay seconds—Number of seconds that the interface delays before responding with a PPPoE Active Discovery Offer (PADO) packet
• Drop—Interface drops (ignores) the packet.
• Terminate—Interface responds immediately with a PADO packet

none

Dynamic Profile

Name of the dynamic profile with which the router creates a dynamic PPPoE subscriber interface. A dynamic profile can be assigned to a named service, empty service, any service, or ACI/ARI pair.

none

Routing Instance

Name of the routing instance in which to instantiate the dynamic PPPoE subscriber interface. A routing instance can be assigned to a named service, empty service, any service, or ACI/ARI pair.

none

Max Sessions

Maximum number of active PPPoE sessions that the router can establish with the specified named service, empty service, or any service.

none

Active Sessions

Current count of active PPPoE sessions created using the specified named service, empty service, or any service. The Active Sessions value cannot exceed the Max Sessions value.

none

ACI

Agent circuit identifier (ACI) that corresponds to the DSLAM interface that initiated the client service request. An asterisk is interpreted as a wildcard character and can appear at the beginning, the end, or both the beginning and end of the string. An ACI can be configured as part of an ACI/ARI pair for a named service, empty service, or any service.

none

ARI

Agent remote identifier (ARI) that corresponds to the subscriber associated with the DSLAM interface that initiated the service request. An asterisk is interpreted as a wildcard character and can appear at the beginning, the end, or both at the beginning and end of the string. An ARI can be configured as part of an ACI/ARI pair for a named service, empty service, or any service.

none

Static Interface

Name of the static PPPoE interface reserved for exclusive use by the PPPoE client with matching ACI/ARI information. A static interface can be configured only for an ACI/ARI pair.

none