show class-of-service interface-set
Syntax
Release Information
Command introduced in Junos OS Release 9.4.
Description
Display the configured shaping rate and the adjusted shaping rate for each logical interface set configured for hierarchical class of service (CoS).
Options
- none
Display CoS associations for all logical interface sets.
- interface-set-name
(Optional) Display CoS associations for the specified interface set.
Required Privilege Level
view
List of Sample Output
show class-of-service interface-setOutput Fields
Table 1 lists the output fields for the show class-of-service interface-set command. Output fields are listed in the approximate order in which they appear.
Table 1: show class-of-service interface-set Output Fields
Field Name | Field Description |
|---|---|
Interface-set | Name of a logical interface set composed of one or more logical interfaces for which hierarchical scheduling is enabled. |
Index | Index of this interface set or the internal index of this object. |
Physical interface | Name of a physical interface. |
Queues supported | Number of queues you can configure on the interface. |
Queues in use | Number of queues currently configured. |
Output traffic control profile | Name of the output traffic-control profile attached to the logical interface set. |
Adjusting application | Name of the application that communicates shaping-rate adjustment information to the Junos class-of-service process (cosd) on the broadband services router (BSR). The BSR uses the information from this application to perform shaping-rate adjustments on the scheduler node that manages the interface set. The adjusting application can be one of the following: ancp LS-0—Junos Access Node Control Profile process (ancpd) that performs shaping-rate adjustments on schedule nodes that are logical interface sets configured to represent subscriber local loops. When the synchronization speed of the DSL line changes, ancpd communicates the local loop speed to cosd over the default logical system, LS-0, and then the BSR throttles the shaping rate on the scheduler node to the loop speed. |
Adjustment type | Type of shaping-rate adjustment performed by the BSR on the scheduler node. The type of adjustment can be one of the following: absolute—The configured shaping rate is adjusted by an absolute value as opposed to by a percentage of the configured rate. |
Configured shaping rate | The maximum transmission rate on the physical interface as configured by the output traffic-control profile attached to the scheduler node. |
Adjustment value | Value of the shaping-rate adjustment information sent by the adjusting application to cosd. |
Sample Output
show class-of-service interface-set
user@host> show class-of-service interface-set
example-ifset-ge-4/0/0-7Interface-set: example-ifset-ge-4/0/0–7, Index: 8 Physical interface: ge-4/0/0, Index: 270 Queues supported: 8, Queues in use: 8 Output traffic control profile: example-tcp-basic-rate, Index: 11395 Adjusting application: ancp LS-0 Adjustment type: absolute Configured shaping rate: 50000000 Adjustment value: 888000
