show ancp subscriber
Syntax
Release Information
Command introduced in Junos OS Release 9.4.
Description
Display information about all subscribers (local access loops), the identified subscriber, or the subscriber associated with the specified ANCP neighbor (access node).
Options
- brief | detail | extensive | terse
(Optional) Display the specified level of detail.
- identifier identifier
(Optional) Display information about the subscriber specified by the access identifier.
- neighbor ip-address
(Optional) Display information about the local loops connected to the specified access node.
Required Privilege Level
view
List of Sample Output
show ancp subscriber briefshow ancp subscriber neighbor ip-address detail
show ancp subscriber identifier identifier detail
Output Fields
Table 1 lists the output fields for the show ancp subscriber command. Output fields are listed in the approximate order in which they appear.
Table 1: show ancp subscriber Output Fields
Field Name | Field Description |
|---|---|
Loop Identifier | Access loop identifier as sent by the access node and configured to map the subscriber to an interface. |
Type | Type of digital subscriber line employed by the access node: ADSL1, ADSL2, ADSL2+, VDSL1, VDSL2, SDSL, or UNKNOWN. |
State | State of the DSL line: Idle, Show Time, or Silent. |
Rate Kbps | Actual downstream data rate for this local loop. |
Neighbor | IP address of ANCP neighbor (access node). |
Access Node Identifier | Access node identifier as sent by the access node and configured to map the subscriber to an interface. |
Neighbor IP Address | IP address of the ANCP neighbor (access node). |
Aggregate Circuit Identifier Binary | Binary identifier for the VLAN circuit ID. |
DSL Type | Type of digital subscriber line employed by the access node: ADSL1, ADSL2, ADSL2+, VDSL1, VDSL2, SDSL, or UNKNOWN. |
Interface Type | Type of interface employed for subscriber traffic: ifl for a single VLAN or interface-set for a configured group of VLANs. |
Interface | Name of the interface set or logical interface. |
DSL Line State | State of the DSL line: Idle, Show Time, or Silent. |
Actual Net Data Upstream | Actual upstream data rate for this local loop, in Kbps. |
Actual Net Data Downstream | Actual downstream data rate for this local loop, in Kbps. |
DSL Line Data Link | Data link protocol employed on the access loop: AAL5 or Ethernet. |
DSL Line Encapsulation | Encapsulation type on the access loop, for Ethernet only:
|
DSL Line Encapsulation Payload | Payload carried across the access loop:
|
Minimum Net Data Upstream | Minimum upstream data rate desired by the operator for this local loop, in Kbps. |
Minimum Net Data Downstream | Minimum downstream data rate desired by the operator for this local loop, in Kbps. |
Maximum Net Data Upstream | Maximum upstream data rate desired by the operator for this local loop, in Kbps. |
Maximum Net Data Downstream | Maximum downstream data rate desired by the operator for this local loop, in Kbps. |
Attainable Net Data Upstream | Maximum attainable upstream data rate for this local loop, in Kbps. |
Attainable Net Data Downstream | Maximum attainable downstream data rate for this local loop, in Kbps. |
Minimum Low Power Data Downstream | Minimum downstream data rate desired by the operator for this local loop in low power state, in Kbps. |
Minimum Low Power Data Upstream | Minimum upstream data rate desired by the operator for this local loop in low power state, in Kbps. |
Maximum Interleave Delay Downstream | Maximum interleaving delay for downstream data, in milliseconds. |
Maximum Interleave Delay Upstream | Maximum interleaving delay for upstream data, in milliseconds. |
Actual Interleave Delay Downstream | Actual interleaving delay for downstream data, in milliseconds. |
Actual Interleave Delay Upstream | Actual interleaving delay for upstream data, in milliseconds. |
Sample Output
show ancp subscriber brief
user@host> show ancp subscriber brief
Loop Identifier Type Interface Rate Neighbor
Kbps
port-1-10 VDSL2 set-ge-10410 64 10.10.10.2
port-1-11 VDSL2 set-ge-10411 64 11.11.11.2
port-2-10 VDSL2 ge-1/0/4.12 64 10.12.12.2
port-2-11 VDSL2 ge-1/0/4.13 64 10.13.13.2 show ancp subscriber neighbor ip-address detail
user@host> show ancp subscriber neighbor 10.11.11.2
detail
Subscriber Information
Access Loop Identifier : port-2-11
Neighbor IP Address : 10.11.11.2
Aggregate Circuit Identifier Binary : 0/0
DSL Type : VDSL2
Interface Type : ifl
Interface : ge-1/0/4.10
DSL Line State : Show Time
Actual Net Data Upstream : 64
Actual Net Data Downstream : 64
DSL Line Data Link : AAL5
DSL Line Encapsulation : N/A
DSL Line Encapsulation Payload : N/A
Minimum Net Data Upstream : 64
Minimum Net Data Downstream : 64
Maximum Net Data Upstream : 64
Maximum Net Data Downstream : 64
Attainable Net Data Upstream : 64
Attainable Net Data Downstream : 64
Minimum Low Power Data Downstream : 64
Minimum Low Power Data Upstream : 64
Maximum Interleave Delay Downstream : 50
Maximum Interleave Delay Upstream : 50
Actual Interleave Delay Downstream : 50
Actual Interleave Delay Upstream : 50
Access Loop Identifier : port-1-11
Neighbor IP Address : 10.11.11.2
Aggregate Circuit Identifier Binary : 0/0
DSL Type : DSL 0
Interface Type : interface-set
Interface : set-ge-10411
DSL Line State : Show Time
Actual Net Data Upstream : 64
Actual Net Data Downstream : 64
DSL Line Data Link : AAL5
DSL Line Encapsulation : N/A
DSL Line Encapsulation Payload : N/A
Minimum Net Data Upstream : 64
Minimum Net Data Downstream : 64
Maximum Net Data Upstream : 64
Maximum Net Data Downstream : 64
Attainable Net Data Upstream : 64
Attainable Net Data Downstream : 64
Minimum Low Power Data Downstream : 64
Minimum Low Power Data Upstream : 64
Maximum Interleave Delay Downstream : 50
Maximum Interleave Delay Upstream : 50
Actual Interleave Delay Downstream : 50
Actual Interleave Delay Upstream : 50
show ancp subscriber identifier identifier detail
user@host> show ancp subscriber identifier port-1-11
detail
Access Loop Identifier : port-1-11
Neighbor IP Address : 10.11.11.2
Aggregate Circuit Identifier Binary : 0/0
DSL Type : DSL 0
Interface Type : interface-set
Interface : set-ge-10411
DSL Line State : Show Time
Actual Net Data Upstream : 64
Actual Net Data Downstream : 64
DSL Line Data Link : AAL5
DSL Line Encapsulation : N/A
DSL Line Encapsulation Payload : N/A
Minimum Net Data Upstream : 64
Minimum Net Data Downstream : 64
Maximum Net Data Upstream : 64
Maximum Net Data Downstream : 64
Attainable Net Data Upstream : 64
Attainable Net Data Downstream : 64
Minimum Low Power Data Downstream : 64
Minimum Low Power Data Upstream : 64
Maximum Interleave Delay Downstream : 50
Maximum Interleave Delay Upstream : 50
Actual Interleave Delay Downstream : 50
Actual Interleave Delay Upstream : 50
