request services flow-collector test-file-transfer

Syntax

Release Information

Command introduced before Junos OS Release 7.4.

Description

(M40e, M160, and M320 routers and T Series routers only) Transfer a test file to the primary or secondary File Transfer Protocol (FTP) server that is configured as a flow collector. This command verifies that the output side of the flow collector interface is operating properly.

Options

filename

Name of the test file to transfer.

interface all | cp-fpc/pic/port)

Transfer a test file of flows from all configured flow collector interfaces or from only the specified interface.

channel-zero | channel-one

Transfer a file from export channel 0 (unit 0) or channel 1 (unit 1) of the PIC.

primary | secondary

Transfer a file to the primary or secondary server configured as a flow collector.

Required Privilege Level

network

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

Flow collector interface: cp-7/1/0
Interface state: Collecting flows
Response: Test file transfer successfully scheduled